M61316SP 데이터 시트보기 (PDF) - MITSUBISHI ELECTRIC

부품명

상세내역

제조사

M61316SP

I2C BUS CONTROLLED VIDEO PRE-AMP FOR HIGH RESOLUTION COLOR DISPLAY

MITSUBISHI ELECTRIC  

MITSUBISHI ICs (MONITOR)

M61311SP/M61316SP

I2C BUS CONTROLLED VIDEO PRE-AMP FOR HIGH RESOLUTION COLOR DISPLAY

Note20) Measure the amplitude output at OUT(26,28,30). The amplitude is called VOUT(26,28,30).

The measured value is ABL1.

Note21) Relative characteristics ABL1 is calculated by the equation below:

ABL1 = VOUT(26) / VOUT(28) , VOUT(28) / VOUT(30) , VOUT(30) / VOUT(26)

Note22) Measuring condition and procedure are the same as described in Note20.

Note23) Measuring condition and procedure are the same as described in Note21.

Note24) Measuring condition and procedure are the same as described in Note20.

Note25) Relative characteristics ABL3 is calculated by the equation below:

ABL3 = VOUT(26) - VOUT(28) , VOUT(28) - VOUT(30) , VOUT(30) - VOUT(26)

Note26) Measure the DC voltage at OUT(26,28,30). The amplitude is called VOUT(26,28,30).

The measured value is called VB1.

Note27) Relative characteristics VB1 is calculated by the equation below:

VB1 = VOUT(26) - VOUT(28) , VOUT(28) - VOUT(30) , VOUT(30) - VOUT(26)

Note28) Measuring condition and procedure are the same as described in Note26.

Note29) Measuring condition and procedure are the same as described in Note27.

Note30) Measuring condition and procedure are the same as described in Note26.

Note31) Measuring condition and procedure are the same as described in Note27.

Note32) Measure the time needed for the input pulse to rise from 10% to 90% (Tr1) and for the output pulse to rise

from 10% to 90% (Tr2) with an active probe.

Pulse characteristics Tr is calculated by the equations below:

Tr = (Tr2)2 - (Tr1)2 (nS)

Note33) Relative characteristics Tr is calculated by the equation below:

Tr = Tr(26) - Tr(28) , Tr(28) - Tr(30) , Tr(30) - Tr(26)

Note34) Measure the time needed for the input pulse to fall from 90% to 10% (Tf1) and for the output pulse to fall

from 90% to 10% (Tf2) with an active probe.

Pulse characteristics Tf is calculated by the equations below:

Tf = (Tf2)2 - (Tf1)2 (nS)

Note35) Relative characteristics Tf is calculated by the equation below:

Tf = Tf(26) - Tf(28) , Tf(28) - Tf(30) , Tf(30) - Tf(26)

100%

90%

0%

Tr1

or

Tr2

10%

Tf1

or

Tf2

MITSUBISHI

ELECTRIC

9

Share Link: