M61311SP 데이터 시트보기 (PDF) - Renesas Electronics

부품명

상세내역

제조사

M61311SP

l2C BUS Controlled Video Pre-amp for High Resolution Color Display

Renesas Electronics 

M61311SP/M61316SP

VC2 Main Contrast Control Characteristics2 (Typ.)

Measuring condition and procedure are the same as described in VC1.

∆VC2 Main Contrast Control Relative Characteristics2

Measuring condition and procedure are the same as described in ∆VC1.

VC3 Main Contrast Control Characteristics3 (Min.)

Measuring condition and procedure are the same as described in VC1.

∆VC3 Main Contrast Control Relative Characteristics3

Relative characteristics ∆VC3 is calculated by the equation below:

∆VC3 = VOUT (26) − VOUT (28),

VOUT (28) − VOUT (30),

VOUT (30) − VOUT (26)

VSC1 Sub Contrast Control Characteristics1 (Max.)

Input SG1, and measure the amplitude output at OUT (26, 28, 30). The amplitude is called VOUT (26, 28, 30).

The measured value is called VSC1.

∆VSC1 Sub Contrast Control Relative Characteristics1

Relative characteristics ∆VSC1 is calculated by the equation below:

∆VSC1 = VOUT (26) / VOUT (28),

VOUT (28) / VOUT (30),

VOUT (30) / VOUT (26)

VSC2 Sub Contrast Control Characteristics2 (Typ.)

Measuring condition and procedure are the same as described in VSC1.

∆VSC2 Sub Contrast Control Relative Characteristics2

Measuring condition and procedure are the same as described in ∆VSC1.

VSC3 Sub Contrast Control Characteristics3 (Min.)

Measuring condition and procedure are the same as described in VSC1.

∆VSC3 Sub Contrast Control Relative Characteristics3

Relative characteristics ∆VSC3 is calculated by the equation below:

∆VSC3 = VOUT (26) − VOUT (28),

VOUT(28) − VOUT (30),

VOUT (30) − VOUT (26)

REJ03F0199-0201 Rev.2.01 Mar 31, 2008

Page 10 of 26

Share Link: