M61311SP 데이터 시트보기 (PDF) - Renesas Electronics

부품명

상세내역

제조사

M61311SP

l2C BUS Controlled Video Pre-amp for High Resolution Color Display

Renesas Electronics 

M61311SP/M61316SP

ABL1 ABL Control Characteristics1

Measure the amplitude output at OUT (26, 28, 30). The amplitude is called VOUT (26, 28, 30).

The measured value is ABL1.

∆ABL1 ABL Control Relative Characteristics1

Relative characteristics ∆ABL1 is calculated by the equation below:

∆ABL1 = VOUT (26) / VOUT (28),

VOUT (28) / VOUT (30),

VOUT (30) / VOUT (26)

ABL2 ABL Control Characteristics2

Measuring condition and procedure are the same as described in ABL1.

∆ABL2 ABL Control Relative Characteristics2

Measuring condition and procedure are the same as described in ∆ABL1.

ABL3 ABL Control Characteristics3

Measuring condition and procedure are the same as described in ABL1.

∆ABL3 ABL Control Relative Characteristics3

Relative characteristics ∆ABL3 is calculated by the equation below:

∆ABL3 = VOUT (26) − VOUT (28),

VOUT (28) − VOUT (30),

VOUT (30) − VOUT (26)

VB1 Brightness Control Characteristics1

Measure the DC voltage at OUT (26, 28, 30). The amplitude is called VOUT (26, 28, 30).

The measured value is called VB1.

∆VB1 Brightness Control Relative Characteristics1

Relative characteristics ∆VB1 is calculated by the equation below:

∆VB1 = VOUT (26) − VOUT (28),

VOUT (28) − VOUT (30),

VOUT (30) − VOUT (26)

VB2 Brightness Control Characteristics2

Measuring condition and procedure are the same as described in VB1.

∆VB2 Brightness Control Relative Characteristics2

Measuring condition and procedure are the same as described in ∆VB1.

VB3 Brightness Control Characteristics3

Measuring condition and procedure are the same as described in VB1.

∆VB3 Brightness Control Relative Characteristics3

Measuring condition and procedure are the same as described in ∆VB1.

REJ03F0199-0201 Rev.2.01 Mar 31, 2008

Page 11 of 26

Share Link: