SC220Q 데이터 시트보기 (PDF) - Semtech Corporation
부품명
상세내역
제조사
SC220Q Datasheet PDF : 14 Pages
| |||
SC220 x
SC220Q
POWER MANAGEMENT
20MHz, 650mA, X-EMI™-Enabled
Synchronous Step-Down Regulator
Features
Patented X-EMITM Inductor Technology
Enables Trace Inductors in PC Board Material
Excellent EMI Performance
Efficiency up to 90%
19µA Quiescent Current under Very Light Loads
Wide Input Voltage Range — 2.7V to 5.5V
Adjustable Output Voltage Down to 1.0V
Output DC Current — up to 650mA
High Light-load Efficiency via Automatic PSAVE Mode
Ultra-fast Transient Response — <1µs
Temperature Range — -40 to +85°C
Shutdown Current — 0.1µA (typical)
Requires Tiny 220nH Inductor
Requires Only 1μF of Output Capacitance
External Switching Frequency Synchronization
Protection Features Including
Over-Current Protection
Output Short-Circuit Protection
Thermal Shutdown Protection
Offered in SOIC 8 Lead Package
Lead-free, halogen-free, and RoHS/WEEE Compliant
AEC-Q100 Qualified Version Available
Applications
HDTV, Set Top Boxes, Gaming Consoles
POL Applications
White Goods
Automotive AEC-Q100 Qualified Applications
Typical Application Circuit
Description
The SC220/Q is a 20MHz X-EMI™(1)-enabled step-down
regulator optimized for power low voltage rails from 2.7
to 5.5V input voltage. X-EMI™ inductor technology
enables inductors to be drawn directly on the PC board.
This technology meets or exceeds the EMI performance
of chip inductors and eliminates the need for discrete
inductors.
The SC220/Q uses a unique constant frequency, self-
oscillating control loop architecture to provide excellent
transient performance. Under light loads, the device
operates in Power Save mode(PSAVE) maintaining a
typical quiescent current of 19µA. At moderate to heavy
loads, this part operates in PWM mode with a constant
switching frequency of 20MHz. This high switching fre-
quency offers the advantages of using small and low cost
external components like a 1µF external capacitor and a
small 220nH inductor (including X-EMITM PCB trace
inductors).
The device provides adjustable output voltages down to
1.0V and an output current up to 650mA. An EN pin can
be used to synchronize to an external source and includes
de-glitching to reduce noise sensitivity.
The SC220/Q is available in SOIC 8 lead package.
The SC220Q is an AEC-Q100 qualified version.
Note 1: Purchase of SC220/Q includes royalty-free right to use X-EMITM inductor technology with no addi-
tional cost.
V IN
2.7~5.5V
C IN
1 µF
E n a b le
P V IN
SW
A V IN
VOUT
SC220
SC220Q
EN
FB
PGND
AGND
L, 220nH
V OUT= 1 .8 V
up to 650mA
R1
COUT
1 µF
R2
January 15, 2013
Share Link: 