LTM2884 데이터 시트보기 (PDF) - Linear Technology

부품명

상세내역

제조사

LTM2884

Isolated USB Transceiver with Isolated Power

Linear Technology 

LTM2884

Electrical Characteristics

Note 1: Stresses beyond those listed under Absolute Maximum Ratings

may cause permanent damage to the device. Exposure to any Absolute

Maximum Rating condition for extended periods may affect device

reliability and lifetime.

Note 2: Guaranteed by design and not production tested.

Note 3: This µModule transceiver includes over temperature protection

that is intended to protect the device during momentary overload

conditions. Junction temperature will exceed 125°C when over

temperature protection is active. Continuous operation above specified

maximum operating junction temperature may result in device degradation

or failure.

Note 4: Maximum data rate is guaranteed by other measured parameters

and is not directly tested.

Note 5: Device considered a 2-terminal device. Measurement between

groups of pins A1 through B11 shorted together and pins K1 through L11

shorted together.

Note 6: The rated dielectric insulation voltage should not be interpreted as

a continuous voltage rating.

Note 7: In accordance with UL1577, each device is proof tested for the

2500VRMS rating by applying the equivalent positive and negative peak

voltage multiplied by an acceleration factor of 1.2 for one second.

2884f

For more information www.linear.com/LTM2884

5

Share Link: