RT9030-10GU5 데이터 시트보기 (PDF) - Richtek Technology

부품명

상세내역

제조사

RT9030-10GU5

150mA, Low Input Voltage, Low Dropout, Low Noise Ultra Fast Without Bypass Capacitor CMOS LDO Regulator

Richtek Technology 

RT9030

Parameter

Line Regulation

Thermal Shutdown Temperature

Thermal Shutdown Hysteresis

Symbol

Test Conditions

VLINE

VIN = (VOUT + 0.5) to 5.5V,

IOUT = 1mA to 150mA

TSD

TSD

Min Typ Max Unit

-- 0.01 0.2 %/V

--

150

--

C

--

20

--

Note 1. Stresses beyond those listed “Absolute Maximum Ratings” may cause permanent damage to the device. These are

stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in

the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions may

affect device reliability.

Note 2. θJA is measured at TA = 25°C on a low effective thermal conductivity single-layer test board per JEDEC 51-3.

Note 3. Devices are ESD sensitive. Handling precaution is recommended.

Note 4. The device is not guaranteed to function outside its operating conditions.

Note 5. Quiescent, or ground current, is the difference between input and output currents. It is defined by IQ = IIN - IOUT under no

load condition (IOUT = 0mA). The total current drawn from the supply is the sum of the load current plus the ground pin

current.

Note 6. The dropout voltage is defined as VIN -VOUT, which is measured when VOUT is VOUT(NORMAL) - 100mV.

Note 7. Regulation is measured at constant junction temperature by using a 2ms current pulse. Devices are tested for load

regulation in the load range from 10mA to 120mA.

Copyright ©2013 Richtek Technology Corporation. All rights reserved.

www.richtek.com

4

is a registered trademark of Richtek Technology Corporation.

DS9030-04 December 2013

Share Link: