19-226-R6BHC-B01-2T 데이터 시트보기 (PDF) - EVERLIGHT

부품명

상세내역

제조사

19-226-R6BHC-B01-2T

Chip LED with Bi-Color (Multi-Color)

EVERLIGHT 

EVERLIGHT ELECTRONICS CO.,LTD.

19-226/R6BHC-B01/2T

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of the

hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether

the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD.

Office: No 25, Lane 76, Sec 3, Chung Yang Rd,

Tucheng, Taipei 236, Taiwan, R.O.C

Tel: 886-2-2267-2000, 2267-9936

Fax: 886-2267-6244, 2267-6189, 2267-6306

http://www.everlight.com

Everlight Electronics Co., Ltd.

Device No:DSE-926-015

http://www.everlight.com

Prepared date: 17-Jan-2006

Rev 1

Page: 11 of 11

Prepared by: Jessica Chang

Share Link: