MLL823-1 데이터 시트보기 (PDF) - Microsemi Corporation
부품명
상세내역
제조사
MLL823-1
Microsemi Corporation
MLL823-1 Datasheet PDF : 3 Pages
| |||
SCOTTSDALE DIVISION
1N821UR thru 1N829AUR-1
(or MLL821 thru MLL829-1)
6.2 & 6.55 Volt Temperature Compensated
Surface Mount Zener Reference Diodes
*ELECTRICAL CHARACTERISTICS @ 25oC, unless otherwise specified
JEDEC
TYPE NUMBER
(Notes 1, 5 & 6)
ZENER
VOLTAGE
(Note 1 and 4)
VZ @ IZT
ZENER
TEST
CURRENT
IZT
MAXIMUM
ZENER
IMPEDANCE
(Note 2)
ZZT @ IZT
MAXIMUM
REVERSE
CURRENT
IR @ 3 V
VOLTAGE
TEMPERATURE
STABILITY
(∆VZT MAX)
-55oC to +100oC
(Note 3 and 4)
EFFECTIVE
TEMPERATURE
COEFFICIENT
αVZ
VOLTS
mA
OHMS
µA
mV
%/oC
1N821UR
5.9 – 6.5
7.5
15
2.0
96
0.01
1N821AUR
5.9 – 6.5
7.5
10
2.0
96
0.01
1N822UR †
5.9 – 6.5
7.5
15
2.0
96
0.01
1N823UR
5.9 – 6.5
7.5
15
2.0
48
0.005
1N823AUR
5.9 – 6.5
7.5
10
2.0
48
0.005
1N824UR †
5.9 – 6.5
7.5
15
2.0
48
0.005
1N825UR
5.9 – 6.5
7.5
15
2.0
19
0.002
1N825AUR
5.9 – 6.5
7.5
10
2.0
19
0.002
1N826UR
6.2 – 6.9
7.5
15
2.0
20
0.002
1N827UR
5.9 – 6.5
7.5
15
2.0
9
0.001
1N827AUR
5.9 – 6.5
7.5
10
2.0
9
0.001
1N828UR
6.2 – 6.9
7.5
15
2.0
10
0.001
1N829UR
5.9 – 6.5
7.5
15
2.0
5
0.0005
1N829AUR
5.9 – 6.5
7.5
10
2.0
5
0.0005
*JEDEC Registered Data.
†Double Anode; electrical specifications apply under both bias polarities.
NOTES:
1. Add a “-1” suffix for internal metallurgical bond. When ordering devices with tighter tolerances than specified for the VZ voltage nominal
of 6.15 V, add a further hyphened suffix number % to the part number for desired tolerance, e.g. 1N827UR-1-2%, 1N829UR-1-1%,
1N829AUR-1%, 1N829AUR-1-1%, etc.
2. Zener impedance is measured by superimposing 0.75 mA ac rms on 7.5 mA dc @ 25oC.
3. The maximum allowable change observed over the entire temperature range i.e., the diode voltage will not exceed the specified mV
change at any discrete temperature between the established limits.
4. Voltage measurements to be performed 15 seconds after application of dc current.
5. 1N821UR-1, 1N823UR-1, 1N825UR-1, 1N827UR-1, and 1N829UR-1 also have qualification to MIL-PRF-19500/159 by adding the JAN,
JANTX, or JANTXV prefix to part numbers as well as the “-1” suffix; e.g. JANTX1N827UR-1, JANTXV1N829UR-1, etc.
6. This product series has also been previously identified as the MLL821 thru MLL829A-1. This alternate name may still be used.
Copyright 2003
12-19-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2
Share Link: