25AA160A 데이터 시트보기 (PDF) - Microchip Technology
부품명
상세내역
제조사
25AA160A Datasheet PDF : 24 Pages
| |||
25XX160A/B
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings(†)
VCC.............................................................................................................................................................................7.0V
All inputs and outputs w.r.t. VSS ......................................................................................................... -0.6V to VCC +1.0V
Storage temperature .................................................................................................................................-65°C to 150°C
Ambient temperature under bias ...............................................................................................................-65°C to 125°C
ESD protection on all pins ..........................................................................................................................................4 kV
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for an
extended period of time may affect device reliability.
TABLE 1-1: DC CHARACTERISTICS
DC CHARACTERISTICS
Industrial (I):
Automotive (E):
TAMB = -40°C to +85°C VCC = 1.8V to 5.5V
TAMB = -40°C to +125°C VCC = 2.5V to 5.5V
Param.
No.
Sym.
Characteristic
Min.
Max. Units
Test Conditions
D001
D002
VIH1
VIH2
High-level input
voltage
2.0
VCC +1
V
0.7 VCC VCC +1
V
D003 VIL1
D004 VIL2
Low-level input
voltage
-0.3
0.8
V
-0.3
0.2 VCC
V
D005 VOL
D006 VOL
Low-level output
voltage
—
0.4
V
—
0.2
V
D007 VOH
High-level output
VCC -0.5
—
V
voltage
D008 ILI
Input leakage current
±1
µA
D009 ILO
Output leakage
current
±1
µA
D010 CINT
Internal Capacitance
—
(all inputs and
outputs)
7
pF
D011 ICC Read
—
—
Operating Current
6
mA
2.5
mA
D012 ICC Write
—
3
mA
D013 ICCS
—
5
µA
Standby Current
—
1
µA
Note: This parameter is periodically sampled and not 100% tested.
VCC ≥ 2.7V (Note)
VCC< 2.7V (Note)
VCC ≥ 2.7V (Note)
VCC < 2.7V (Note)
IOL = 2.1 mA
IOL = 1.0 mA, VCC < 2.5V
IOH = -400 µA
CS = VCC, VIN = VSS TO VCC
CS = VCC, VOUT = VSS TO VCC
TAMB = 25°C, CLK = 1.0 MHz,
VCC = 5.0V (Note)
VCC = 5.5V; FCLK = 10.0 MHz;
SO = Open
VCC = 2.5V; FCLK = 5.0 MHz;
SO = Open
VCC = 5.5V
CS = VCC = 5.5V, Inputs tied to VCC or
VSS, TAMB = -40°C TO +125°C
CS = VCC = 2.5V, Inputs tied to VCC or
VSS, TAMB = -40°C TO +85°C
DS21807B-page 2
2003 Microchip Technology Inc.
Share Link: 