28F016XD-95 데이터 시트보기 (PDF) - Intel
부품명
상세내역
제조사
28F016XD-95 Datasheet PDF : 54 Pages
| |||
E
28F016XD FLASH MEMORY
5.0 ELECTRICAL SPECIFICATIONS
5.1 Absolute Maximum Ratings*
Temperature Under Bias ....................0°C to +80°C
Storage Temperature ...................–65°C to +125°C
NOTICE: This is a production datasheet. The
specifications are subject to change without notice. Verify
with your local Intel Sales office that you have the latest
datasheet before finalizing a design.
*WARNING: Stressing the device beyond the “Absolute
Maximum Ratings” may cause permanent damage.
These are stress ratings only. Operation beyond the
“Operating Conditions” is not recommended and
extended exposure beyond the "Operating Conditions"
may affect device reliability.
VCC = 3.3V ± 0.3V Systems
Sym
Parameter
Notes Min Max Units Test Conditions
TA Operating Temperature, Commercial
1
0 70 °C Ambient Temperature
VCC VCC with Respect to GND
VPP VPP Supply Voltage with Respect to GND
V
Voltage on any Pin (except VCC,VPP) with
Respect to GND
I
Current into any Non-Supply Pin
2 –0.2 7.0 V
2,3 –0.2 14.0 V
2,5 –0.5 VCC V
+
0.5
5
± 30 mA
IOUT Output Short Circuit Current
4
100 mA
VCC = 5.0V ± 0.5V Systems
Sym
Parameter
Notes Min Max Units Test Conditions
TA Operating Temperature, Commercial
1
0 70 °C Ambient Temperature
VCC VCC with Respect to GND
VPP VPP Supply Voltage with Respect to GND
V
Voltage on any Pin (except VCC,VPP) with
Respect to GND
I
Current into any Non-Supply Pin
2 –0.2 7.0 V
2,3 –0.2 14.0 V
2,5 –2.0 7.0 V
5
± 30 mA
IOUT Output Short Circuit Current
4
100 mA
NOTES:
1. Operating temperature is for commercial product defined by this specification.
2. Minimum DC voltage is –0.5V on input/output pins. During transitions, this level may undershoot to–2.0V for periods
<20 ns. Maximum DC voltage on input/output pins is VCC + 0.5V which, during transitions, may overshoot to VCC + 2.0V for
periods <20 ns.
3. Maximum DC voltage on VPP may overshoot to +14.0V for periods <20 ns.
4. Output shorted for no more than one second. No more than one output shorted at a time.
5. This specification also applies to pins marked “NC.”
19
Share Link: 