2SC4853A(2008) 데이터 시트보기 (PDF) - SANYO -> Panasonic
부품명
상세내역
제조사
2SC4853A Datasheet PDF : 5 Pages
| |||
S Parameters (Common emitter)
VCE=1V, IC=1mA, ZO=50Ω
Freq(MHz)
⏐S11⏐
∠S11
200
0.940
--17.9
400
0.863
--33.7
600
0.778
--48.0
800
0.698
--60.5
1000
0.608
--73.5
1200
0.546
--84.7
1400
0.470
--96.2
1600
0.418
--106.4
1800
0.388
--117.3
2000
0.354
--127.0
VCE=2V, IC=3mA, ZO=50Ω
Freq(MHz)
⏐S11⏐
200
0.839
400
0.672
600
0.536
800
0.431
1000
0.360
1200
0.310
1400
0.265
1600
0.242
1800
0.228
2000
0.217
∠S11
--30.6
--53.7
--71.7
--85.7
--99.0
--111.4
--122.6
--134.7
--148.0
--157.2
2SC4853A
⏐S21⏐
3.228
2.983
2.732
2.469
2.320
2.106
1.977
1.826
1.700
1.615
∠S21
159.6
143.7
129.9
117.7
106.2
96.3
87.1
78.8
72.2
65.9
⏐S12⏐
0.058
0.107
0.145
0.173
0.195
0.210
0.129
0.224
0.230
0.234
⏐S21⏐
7.428
6.016
4.908
4.073
3.494
3.033
2.694
2.422
2.205
2.061
∠S21
149.3
128.5
113.6
101.9
92.7
84.4
77.4
70.9
65.9
60.8
⏐S12⏐
0.050
0.083
0.105
0.121
0.135
0.150
0.162
0.175
0.189
0.205
∠S12
77.1
66.6
58.1
50.9
45.4
40.9
37.6
35.3
33.8
32.9
∠S12
71.4
60.6
55.1
52.5
51.4
50.9
50.9
51.0
51.1
51.0
⏐S22⏐
0.972
0.914
0.844
0.773
0.717
0.668
0.624
0.590
0.562
0.546
∠S22
--12.2
--22.7
--31.7
--39.6
--46.0
--51.7
--56.5
--60.6
--64.3
--67.5
⏐S22⏐
0.916
0.778
0.672
0.597
0.548
0.514
0.492
0.475
0.461
0.456
∠S22
--18.3
--30.2
--37.1
--41.9
--45.7
--49.2
--52.3
--55.6
--59.0
--61.8
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party’s
intellectual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of December, 2008. Specifications and information herein are subject
to change without notice.
PS No. A1076-5/5
Share Link: 