ACPL-W314-060E 데이터 시트보기 (PDF) - Avago Technologies

부품명

상세내역

제조사

ACPL-W314-060E

0.6 Amp Output Current IGBT Gate Driver Optocoupler

Avago Technologies 

ACPL-P314 and ACPL-W314

0.6 Amp Output Current IGBT Gate Driver Optocoupler

Data Sheet

Lead (Pb) Free

RoHS 6 fully

compliant

RoHS 6 fully compliant options available;

-xxxE denotes a lead-free product

Description

The ACPL-P314/W314 consists of a GaAsP LED optically

coupled to an integrated circuit with a power output

stage. These optocouplers are ideally suited for driving

power IGBTs and MOSFETs used in motor control inverter

applications. The high operating voltage range of the

output stage provides the drive voltages required by

gate controlled devices. The voltage and current supplied

by this optocoupler makes it ideally suited for directly

driving small or medium power IGBTs.

Applications

 Isolated IGBT/Power MOSFET gate drive

 AC and brushless DC motor drives

 Industrial inverters

 Inverter for home appliances

 Induction cooker

 Switching Power Supplies (SPS)

Functional Diagram

ANODE 1

N.C. 2

CATHODE 3

SHIELD

6 VCC

5 VO

4 VEE

Truth Table

LED

VO

OFF LOW

ON

HIGH

Note: A 0.1 μF bypass capacitor

must be connected between

pins VCC and VEE.

Features

 High speed response.

 Ultra high CMR.

 Bootstrappable supply current.

 Available in Stretched SO-6 package

 Package Clearance/Creepage at 8mm (ACPL-W314)

 Safety Approval:

UL1577 recognized with 3750 Vrms for 1 minute for

ACPL-P314 and 5000 Vrms for 1 minute for ACPL-

W314.

CSA Approved.

IEC/EN/DIN EN 60747-5-2 Approved

VIORM = 891Vpeak for ACPL-P314

VIORM = 1140Vpeak for ACPL-W314

Specifications

 0.6 A maximum peak output current.

 0.4 A minimum peak output current.

 0.7 μs maximum propagation delay over temperature

range.

 ICC(max) = 3 mA maximum supply current.

 25 kV/μs minimum common mode rejection (CMR) at

VCM = 1500 V.

 Wide VCC operating range: 10 V to 30 V over tempera-

ture range.

 Wide operating temperature range: –40°C to 100°C.

CAUTION: It is advised that normal static precautions be taken in handling and assembly

of this component to prevent damage and/or degradation which may be induced by ESD.

Share Link: