Table 7. Package Characteristics
Parameter
Symbol Min. Typ. Max. Units Test Conditions
Fig. Note
Input-Output
Momentary
Withstand Voltage
ACPL-P314 VISO
ACPL-W314
3750
5000
Vrms
TA = 25°C,
1, 3
RH < 50% for 1 min.
2, 3
Input-Output
Resistance
RI-O
1012
VI-O = 500 V
3
Input-Output
Capacitance
CI-O
0.6
pF
Freq=1 MHz
Notes:
1. In accordance with UL 1577, each optocoupler is proof tested by applying an insulation test voltage > 4500 Vrms for 1 second (leakage detection
current limit II-O < 5 A). This test is performed before 100% production test for partial discharge (method B) shown in the IEC/EN/DIN EN
60747-5-2 Insulation Characteristics Table, if applicable.
2. In accordance with UL 1577, each optocoupler is proof tested by applying an insulation test voltage > 6000 Vrms for 1 second (leakage detection
current limit II-O < 5 A). This test is performed before 100% production test for partial discharge (method B) shown in the IEC/EN/DIN EN 60747-
5-2 Insulation Characteristics Table, if applicable.
3. Device considered a two-terminal device: pins on input side shorted together and pins on output side shorted together.
7