ACPL-P340-560E 데이터 시트보기 (PDF) - Avago Technologies

부품명

상세내역

제조사

ACPL-P340-560E

1.0 Amp Output Current IGBT Gate Drive Optocoupler with Rail-to-Rail Output Voltage in Stretched SO6

Avago Technologies 

Recommended Pb-Free IR Profile

Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Non- Halide Flux should be used.

Regulatory Information

The ACPL-P340/W340 is approved by the following organizations:

UL

Recognized under UL 1577, component recognition program up to VISO = 3750 VRMS (ACPL-P340) and VISO = 5000 VRMS

(ACPL-W340) expected prior to product release.

CSA

CSA Component Acceptance Notice #5, File CA 88324

IEC/EN/DIN EN 60747-5-2 (Option 060 Only)

Maximum Working Insulation Voltage VIORM = 891 Vpeak (ACPL-P340) and VIORM = 1140 Vpeak (ACPL-W340)

Table 1. IEC/EN/DIN EN 60747-5-2 Insulation Characteristics* (Option 060 – Under Evaluation)

Description

ACPL-P340

ACPL-W340

Symbol

Option 060

Option 060

Unit

Installation classification per DIN VDE 0110/1.89, Table 1

for rated mains voltage ≤ 150 Vrms

for rated mains voltage ≤ 300 Vrms

for rated mains voltage ≤ 450 Vrms

for rated mains voltage ≤ 600 Vrms

for rated mains voltage ≤ 1000 Vrms

Climatic Classification

I – IV

I – IV

I – III

I – III

55/100/21

I – IV

I – IV

I – IV

I – IV

I – III

55/100/21

Pollution Degree (DIN VDE 0110/1.89)

2

2

Maximum Working Insulation Voltage

VIORM

891

1140

Vpeak

Input to Output Test Voltage, Method b*

VPR

VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec,

Partial discharge < 5 pC

1671

2137

Vpeak

Input to Output Test Voltage, Method a*

VIORM x 1.6 = VPR, Type and Sample Test, tm = 10 sec,

Partial discharge < 5 pC

VPR

1426

1824

Vpeak

Highest Allowable Overvoltage

(Transient Overvoltage tini = 60 sec)

VIOTM

6000

8000

Vpeak

Safety-limiting values – maximum values allowed in the event

of a failure.

TS

175

175

°C

Case Temperature

IS, INPUT

230

230

mA

Input Current

PS, OUTPUT

600

600

mW

Output Power

Insulation Resistance at TS, VIO = 500 V

RS

>109

>109



* Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section, (IEC/EN/

DIN EN 60747-5-2) for a detailed description of Method a and Method b partial discharge test profiles.

Note:

These optocouplers are suitable for “safe electrical isolation” only within the safety limit data. Maintenance of the safety data shall be ensured by

means of protective circuits. Surface mount classification is Class A in accordance with CECC 00802.

4

Share Link: