ACPL-M484-500E 데이터 시트보기 (PDF) - Avago Technologies

부품명

상세내역

제조사

ACPL-M484-500E

Positive Logic High CMR Intelligent Power Module and Gate Drive Interface Optocoupler

Avago Technologies 

Recommended Pb-Free IR Profile

Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Non-Halide Flux should be used.

Regulatory Information

The ACPL-M484/P484/W484 is approved by the following organizations:

IEC/EN/DIN EN 60747-5-5 (Option 060 only)

Approved with Maximum Working Insulation Voltage VIORM = 567 Vpeak for ACPL-M484, VIORM = 891 Vpeak for ACPL-P484

and VIORM = 1140 Vpeak for ACPL-W484

UL

Approval under UL 1577, component recognition program up to VISO = 3750 VRMS File E55361 for ACPL-M484 & ACPL-

P484;

Approval under UL 1577, component recognition program up to VISO = 5000 VRMS File E55361 for ACPL-W484;

CSA

Approval under CSA Component Acceptance Notice #5, File CA 88324.

Table 1. IEC/EN/DIN EN 60747-5-5 Insulation Characteristics* (ACPL-M484/P484/W484 Option 060)

Description

Symbol ACPL-M484 ACPL-P484 ACPL-W484 Unit

Installation classification per DIN VDE 0110/1.89, Table 1

for rated mains voltage ≤ 150 Vrms

for rated mains voltage ≤ 300 Vrms

for rated mains voltage ≤ 600 Vrms

I – IV

I – IV

I – IV

I – III

I – III

I – III

I – II

I – II

I – II

Climatic Classification

55/105/21 55/105/21 55/105/21

Pollution Degree (DIN VDE 0110/1.89)

2

2

2

Maximum Working Insulation Voltage

VIORM

567

891

1140

Vpeak

Input to Output Test Voltage, Method b*

VPR

VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec,

Partial discharge < 5 pC

1063

1670

2137

Vpeak

Input to Output Test Voltage, Method a*

VPR

907

VIORM x 1.6 = VPR, Type and Sample Test, tm = 10 sec,

Partial discharge < 5 pC

1426

1824

Vpeak

Highest Allowable Overvoltage

(Transient Overvoltage tini = 60 sec)

VIOTM

6000

6000

8000

Vpeak

Safety-limiting values – maximum values allowed in

the event of a failure.

TS

175

175

175

°C

Case Temperature

IS, INPUT

230

230

230

mA

Input Current

PS, OUTPUT 600

600

600

mW

Output Power

Insulation Resistance at TS, VIO = 500 V

RS

>109

>109

>109

Ω

* Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section, (IEC/EN/

DIN EN 60747-5-2) for a detailed description of Method a and Method b partial discharge test profiles.

5

Share Link: