ACS10D 데이터 시트보기 (PDF) - Intersil
부품명
상세내역
제조사
ACS10D Datasheet PDF : 8 Pages
| |||
Specifications ACS10MS
TABLE 5. DELTA PARAMETERS (+25oC)
PARAMETER
SYMBOL
(NOTE 1)
DELTA LIMIT
Supply Current
ICC
±1.0
Output Current
IOL/IOH
±15
NOTE:
1. All delta calculations are referenced to 0 hour readings or pre-life readings.
UNITS
µA
%
TABLE 6. APPLICABLE SUBGROUPS
CONFORMANCE GROUPS
METHOD
GROUP A SUBGROUPS
Initial Test (Preburn-In)
100%/5004
1, 7, 9
Interim Test 1 (Postburn-In)
100%/5004
1, 7, 9
Interim Test 2 (Postburn-In)
100%/5004
1, 7, 9
PDA
100%/5004
1, 7, 9, Deltas
Interim Test 3 (Postburn-In)
100%/5004
1, 7, 9
PDA
100%/5004
1, 7, 9, Deltas
Final Test
100%/5004
2, 3, 8A, 8B, 10, 11
Group A (Note 1)
Sample/5005
1, 2, 3, 7, 8A, 8B, 9, 10, 11
Group B
Subgroup B-5
Sample/5005 1, 2, 3, 7, 8A, 8B, 9, 10, 11, Deltas
Subgroup B-6
Sample/5005
1, 7, 9
Group D
Sample/5005
1, 7, 9
NOTE:
1. Alternate Group A testing may be exercised in accordance with MIL-STD-883, Method 5005.
READ AND RECORD
ICC, IOL/H, IOZL/H
ICC, IOL/H, IOZL/H
ICC, IOL/H, IOZL/H
ICC, IOL/H, IOZL/H
Subgroups 1, 2, 3, 9, 10, 11
TABLE 7. TOTAL DOSE IRRADIATION
CONFORMANCE GROUP METHOD
PRE RAD
Group E Subgroup 2
5005
1, 7, 9
NOTE:
1. Except FN test which will be performed 100% Go/No-Go.
TEST
POST RAD
Table 4
READ AND RECORD
PRE RAD
POST RAD
1, 9
Table 4 (Note 1)
TABLE 8. BURN-IN TEST CONNECTIONS (+125oC < TA < 139oC)
OPEN
GROUND
STATIC BURN-IN 1 (Note 1)
-
1, 2, 3, 4, 5, 7, 9, 10,
11, 13
STATIC BURN-IN 2 (Note 1)
-
7
DYNAMIC BURN-IN (Note 1)
-
7
1/2 VCC = 3V ±0.5V
6, 8, 12
6, 8, 12
6, 8, 12
VCC = 6V ±0.5V
14
1, 2, 3, 4, 5, 9, 10,
11, 13, 14
14
NOTE:
1. Each pin except VCC and GND will have a series resistor of 500Ω ±5% for static burn-in.
OSCILLATOR
50kHz
25kHz
-
-
-
-
1, 2, 3, 4, 5,
-
9, 10, 11, 13
TABLE 9. IRRADIATION TEST CONNECTIONS (TA = +25oC, ±5oC)
FUNCTION
OPEN
GROUND
VCC = 5V ±0.5V
Irradiation Circuit (Note 1)
6, 8, 12
7
1, 2, 3, 4, 5, 9, 10, 11, 13, 14
NOTE:
1. Each pin except VCC and GND will have a series resistor of 47kΩ ±5%. Group E, Subgroup 2, sample size is 4 dice/wafer, 0 failures.
Spec Number 518814
4
Share Link: 