ACS8522 데이터 시트보기 (PDF) - Semtech Corporation
부품명
상세내역
제조사
ACS8522 Datasheet PDF : 118 Pages
| |||
ACS8522 SETS LITE
ADVANCED COMMUNICATIONS
Pin Description
Table 1 Power Pins
Pin Number
Symbol
I/O
8, 9,
VD1+, VD2+,
P
12
VD3+
22
VDD_DIFF
P
Type
-
-
27
VDD5V
P
-
32, 36,
VDD1, VDD2,
P
-
38, 39,
VDD3, VDD4,
45, 46,
VDD5, VDD6,
54
VDD7
4
VA1+
P
-
14, 57
VA2+, VA3+
P
-
15, 58
AGND3, AGND4
-
7, 10,
DGND1, DGND2, P
-
11
DGND3
31, 40,
DGND4, DGND5, P
-
53
DGND6
21
GND_DIFF
P
-
1, 3
AGND1, AGND2 P
-
FINAL
DATASHEET
Description
Supply Voltage: Digital supply to gates in analog section, +3.3 Volts
±10%.
Supply Voltage: Digital supply for differential output pins 19 and 20,
+3.3 Volts ±10%.
VDD5V: Digital supply for +5 Volts tolerance to input pins. Connect to
+5 Volts (±10%) for clamping to +5 Volts. Connect to VDD for clamping
to +3.3 Volts. Leave floating for no clamping. Input pins tolerant up to
+5.5 Volts.
Supply Voltage: Digital supply to logic, +3.3 Volts ±10%.
Supply Voltage: Analog supply to clock multiplying PLL,
+3.3 Volts ±10%.
Supply Voltage: Analog supply to output PLLs APLL2 and APLL1,
+3.3 Volts ±10%.
Supply Ground: Analog ground for output PLLs APLL2 and APLL1.
Supply Ground: Digital ground for components in PLLs.
Supply Ground: Digital ground for logic.
Supply Ground: Digital ground for differential output pins 19 and 20.
Supply Ground: Analog grounds.
Note...I = Input, O = Output, P = Power, TTLU = TTL input with pull-up resistor, TTLD = TTL input with pull-down resistor.
Table 2 Internally Connected Pins
Pin Number
Symbol
I/O
2, 16, 23, 24, IC1, IC2, IC3, IC4, -
25, 26, 35, IC5, IC6, IC7,
60, 61, 62, IC8, IC9, IC10,
63
IC11
Type
-
Description
Internally Connected: Leave to Float.
Table 3 Other Pins
Pin Number
Symbol
I/O
5
INTREQ
O
6
REFCLK
I
Type
TTL/CMOS
TTL
Description
Interrupt Request: Active High/Low software Interrupt output.
Reference Clock: 12.800 MHz (refer to section headed Local Oscillator
Clock).
Revision 5/November 2006 © Semtech Corp.
Page 5
www.semtech.com
Share Link: 