AD7280 데이터 시트보기 (PDF) - Analog Devices

부품명

상세내역

제조사

AD7280

Lithium Ion Battery Monitoring System

Analog Devices 

Preliminary Technical Data

TERMINOLOGY

Differential Nonlinearity

This is the difference between the measured and the ideal 1 LSB

change between any two adjacent codes in the ADC.

Integral Nonlinearity

This is the maximum deviation from a straight line passing

through the endpoints of the ADC transfer function. The

endpoints of the transfer function are zero scale (a point 1 LSB

below the first code transition) and full scale (a point 1 LSB above

the last code transition).

Offset Code Error

This applies to straight binary output coding. It is the deviation

of the first code transition (00 ... 000) to (00 ... 001) from the

ideal, that is, AGND + 1 LSB.

Gain Error

This applies to straight binary output coding. It is the deviation

of the last code transition (111 ... 110) to (111 ... 111) from the

ideal (that is, 4 × VREF − 1 LSB, 2 × VREF − 1 LSB, VREF − 1 LSB)

after adjusting for the offset error.

ADC Unadjusted Error

ADC Unadjusted Error includes integral nonlinearity errors,

offset and gain errors of the ADC and measurement channel.

Total Unadjusted Error (TUE)

This is the maximum deviation of the output code from the

ideal. Total Unadjusted Error includes integral nonlinearity

errors, offset and gain errors and reference drift.

Offset Error Match

This is the difference in zero code error across all 6 channels.

Gain Error Match

The difference in gain error across all 6 channels.

Track-and-Hold Acquisition Time

The track-and-hold amplifier returns to track mode at the end

of a conversion. Track-and-hold acquisition time is the time

required for the output of the track-and-hold amplifier to reach

its final value, within ±½ LSB, after the end of conversion.

Common Mode Rejection Ration (CMRR)

CMRR is defined as the ratio of the power in the ADC output

at full-scale frequency, f, to the power of a 100 mV sine wave

applied to the common-mode voltage of the Vin(n) and

AD7280

Vin(n-1) frequency, fS, as

CMRR (dB) = 10 log (Pf/PfS)

where Pf is the power at frequency f in the ADC output, and PfS

is the power at frequency fS in the ADC output.

Power Supply Rejection Ration (PSRR)

Variations in power supply affect the full-scale transition but

not the converter’s linearity. PSRR is the maximum change in

the full-scale transition point due to a change in power supply

voltage from the nominal value.

Reference Voltage Temperature Coefficient

Reference voltage temperature coefficient is derived from the

maximum and minimum reference output voltage (VREF)

measured at TMIN, T(25°C), and TMAX. It is expressed in ppm/°C

using the following equation:

TCVREF

(

ppm

/

°C)

=

VREF ( Max)

VREF (25°C) ×

– VREF

(TMAX

( Min)

– TMIN

)

×

10

6

where:

VREF(Max) = Maximum VREF at TMIN, T(25°C), or TMAX

VREF(Min) = Minimum VREF at TMIN, T(25°C), or TMAX

VREF(25°C) = VREF at +25°C

TMAX = +85°C

TMIN = –40°C

Output Voltage Hysteresis

Output voltage hysteresis, or thermal hysteresis, is defined as the

absolute maximum change of reference output voltage after the

device is cycled through temperature from either

T_HYS+ = +25°C to TMAX to +25°C

T_HYS– = +25°C to TMIN to +25°C

It is expressed in ppm using the following equation:

VHYS ( ppm) =

VREF (25°C) − VREF (T _ HYS)

VREF (25°C)

× 106

where:

VREF(25°C) = VREF at 25°C

VREF(T_HYS) = Maximum change of VREF at T_HYS+ or

T_HYS–.

Rev. PrD | Page 9 of 33

Share Link: