REV. A
Figure 12. AD9022/PCB Evaluation Board Schematic
–10–
OBSOLETE
signal. The AD9713B is terminated into 51 Ω to provide a
1 V p-p signal at the output (RC Output).
Output Data
The output data bits are latched with two 74LS574 latches
which drive a 40-pin connector (AMP p/n 102153-09). The
data and clock signals are available at the connector per the pin
assignments shown on the schematic of the evaluation board.
Data is latched on the rising edge of the encode clock.
AD9022
Analog Input
Analog input signals can be fed directly into the device under
test input (AIN). The AIN input is terminated at the device with
a 62 Ω resistor to give a parallel equivalent of 51 Ω (62 Ωʈ300 Ω).
DAC Reconstruction
The AD9022 evaluation board provides an on-board AD9713B
reconstruction DAC for observing the digitized analog input