RCM1381U-A 데이터 시트보기 (PDF) - ROHM Semiconductor
부품명
상세내역
제조사
RCM1381U-A Datasheet PDF : 8 Pages
| |||
Liquid crystal displays
FPrecautions during use
(1) Handling precautions
S Protect the module from strong shocks as they can
cause damage or defective operation.
S The polarizing plate on the surface of the module is
soft and can easily be scratched. Wipe away dirt and
dust using an alcohol-based cleanser.
S If the liquid crystal panel is damaged and liquid crystal
contacts your clothing or body, wash immediately with
soap and water.
S Do not touch the IC lead electrodes or the electrode
terminal components.
S If the module is to be used for long periods subjected
to direct sunlight, employ a filter to block the ultraviolet
rays.
(2) Precautions during operation
S Do not connect or disconnect the module while the
power supply is turned on.
S Input the input signal after the module power supply is
turned on. When turning it off, turn off the input signal
first. Otherwise the IC may be damaged by the latch-
up phenomenon.
(3) Precautions during installation
S Be careful to avoid damage from static electricity. A
CMOS-IC is used in the module circuitry that can be
easily damaged by static electricity.
S A protective film is pasted over the front and back of
the module to protect the panel surfaces. When peel-
ing this film off, be sure to peel as slow as possible in
order to minimize the generation of static electricity.
Use of an ion blower or other deionizing device is rec-
ommended.
RCM1381U-A
148
Share Link: 