AD9513(Rev0) 데이터 시트보기 (PDF) - Analog Devices
부품명
상세내역
제조사
AD9513 Datasheet PDF : 28 Pages
| |||
ABSOLUTE MAXIMUM RATINGS
AD9513
Table 8.
Parameter or Pin
VS
RSET
CLK
CLK
OUT0, OUT1, OUT2
FUNCTION
STATUS
Junction Temperature1
Storage Temperature
Lead Temperature (10 sec)
With
Respect
to
Min Max Unit
GND
−0.3 +3.6
V
GND
−0.3 VS + 0.3 V
GND
−0.3 VS + 0.3 V
CLKB
−1.2 +1.2
V
GND
−0.3 VS + 0.3 V
GND
−0.3 VS + 0.3 V
GND
−0.3 VS + 0.3 V
150
°C
−65 +150 °C
300
°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to
absolute maximum ratings for extended periods may affect
device reliability.
THERMAL CHARACTERISTICS2
Thermal Resistance
32-Lead LFCSP3
θJA = 36.6°C/W
1 See Thermal Characteristics for θJA.
2 Thermal impedance measurements were taken on a 4-layer board in still air
in accordance with EIA/JESD51-7.
3 The external pad of this package must be soldered to adequate copper land
on board.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. 0 | Page 11 of 28
Share Link: 