AD9520-5BCPZ 데이터 시트보기 (PDF) - Analog Devices
부품명
상세내역
제조사
AD9520-5BCPZ Datasheet PDF : 74 Pages
| |||
Data Sheet
12 LVPECL/24 CMOS Output
Clock Generator
AD9520-5
FEATURES
Low phase noise, phase-locked loop (PLL)
Optional external 3.3 V/5 V VCO/VCXO to 2.4 GHz
1 differential or 2 single-ended reference inputs
Accepts CMOS, LVDS, or LVPECL references to 250 MHz
Accepts 16.62 MHz to 33.3 MHz crystal for reference input
Optional reference clock doubler
Reference monitoring capability
Automatic/ manual reference holdover and reference
switchover modes, with revertive switching
Glitch-free switchover between references
Automatic recovery from holdover
Digital or analog lock detect, selectable
Optional zero delay operation
Twelve 1.6 GHz LVPECL outputs divided into 4 groups
Each group of 3 outputs shares a 1-to-32 divider with
phase delay
Additive output jitter as low as 225 fs rms
Channel-to-channel skew grouped outputs < 16 ps
Each LVPECL output can be configured as 2 CMOS outputs
(for fOUT ≤ 250 MHz)
Automatic synchronization of all outputs on power-up
Manual output synchronization available
SPI- and I²C-compatible serial control port
64-lead LFCSP
Nonvolatile EEPROM stores configuration settings
FUNCTIONAL BLOCK DIAGRAM
CP
REFIN
REFIN
CLK
CLK
REF1
STATUS
MONITOR
REF2
DIVIDER
AND MUXES
DIV/Φ
DIV/Φ
DIV/Φ
DIV/Φ
ZERO
DELAY
LVPECL/
CMOS
OUT0
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
OUT9
OUT10
OUT11
SPI/I2C CONTROL
PORT AND
EEPROM
DIGITAL LOGIC
AD9520-5
Figure 1.
APPLICATIONS
Low jitter, low phase noise clock distribution
Clock generation and translation for SONET, 10Ge, 10GFC,
Synchronous Ethernet, OTU2/3/4
Forward error correction (G.710)
Clocking high speed ADCs, DACs, DDSs, DDCs, DUCs, MxFEs
High performance wireless transceivers
ATE and high performance instrumentation
Broadband infrastructures
GENERAL DESCRIPTION
The AD9520-51 provides a multioutput clock distribution
function with subpicosecond jitter performance, along with
an on-chip PLL that can be used with an external VCO.
The AD9520-5 serial interface supports both SPI and I²C ports.
An in-package EEPROM, which can be programmed through the
serial interface, can store user-defined register settings for
power-up and chip reset.
The AD9520-5 features 12 LVPECL outputs in four groups. Any
of the 1.6 GHz LVPECL outputs can be reconfigured as two
250 MHz CMOS outputs. If an application requires LVDS
drivers instead of LVPECL drivers, refer to the AD9522-5.
Each group of three outputs has a divider that allows both the
divide ratio (from 1 to 32) and the phase offset or coarse time
delay to be set.
The AD9520-5 is available in a 64-lead LFCSP and can be operated
from a single 3.3 V supply. The external VCO can have an
operating voltage of up to 5.5 V. A separate output driver power
supply can be from 2.375 V to 3.465 V.
The AD9520-5 is specified for operation over the standard
industrial range of −40°C to +85°C.
1 AD9520 is used throughout this data sheet to refer to all the members of the AD9520 family. However, when AD9520-5 is used, it refers to that specific member of the
AD9520 family.
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2008–2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
Share Link: 