Data Sheet
ADM1065
LFCSP1
39
Pin No.
TQFP
46
40
47
Mnemonic
VDDCAP
GND2
Description
Device Supply Voltage. Linearly regulated from the highest of the VPx, VH pins to a typical
of 4.75 V. Note that the capacitor must be connected between this pin and GND. A 10 µF
capacitor is recommended for this purpose.
Supply Ground.
1 Note that the LFCSP has an exposed pad on the bottom. This pad is a no connect (NC). If possible, this pad should be soldered to the board for improved mechanical stability.
2 In a typical application, all ground pins are connected together.
Rev. E | Page 9 of 28