ADP198(RevD) 데이터 시트보기 (PDF) - Analog Devices

부품명

상세내역

제조사

ADP198
(Rev.:RevD)

Logic Controlled, 1 A, High-Side Load Switch with Reverse Current Blocking

Analog Devices 

Data Sheet

THEORY OF OPERATION

ADP198

VIN

REVERSE

POLARITY

PROTECTION

VOUT

SEL0

SEL1

EN

GND

SLEW

RATE CONTROL

LEVEL SHIFT

Figure 22. Functional Block Diagram

The ADP198 is a high-side PMOS load switch that is designed

for supply operation between 1.65 V and 6.5 V. The PMOS load

switch has a low on resistance of 50 mΩ at VIN = 3.3 V and

supports 1 A of continuous load current. The ADP198 features

low quiescent current at 2.5 μA typical using a 2.8 V supply.

ADP198

The enable input incorporates a nominal 4 MΩ pull-down

resistor. SEL0 and SEL1 program the start-up time of the load

switch to reduce inrush current when the switch is turned on.

The reverse current protection circuitry prevents current from

flowing backwards through the ADP198 when the output voltage

is greater than the input voltage. A comparator senses the differ-

ence between the input and output voltages. When the difference

between the input voltage and output voltage exceeds 75 mV,

the body of the PFET is switched to VOUT and turned off or

opened. In other words, the gate is connected to VOUT.

The packaging is a space-saving 1 mm × 1 mm, 4-ball WLCSP.

The ADP198 is also available in a 2 mm × 2 mm × 0.55 mm,

0.5 mm pitch LFCSP.

Rev. D | Page 11 of 16

Share Link: