Data Sheet
ADP198
VOUT 1
VOUT 2
GND 3
ADP198
TOP VIEW
(Not to Scale)
8 VIN
7 VIN
6 EN
SEL1 4
5 SEL0
NOTES
1. THE EXPOSED PAD IS CONNECTED TO THE SUBSTRATE OF THE ADP198
AND MUST BE CONNECTED TO GROUND.
Figure 5. 8-Lead LFCSP Pin Configuration
Table 5. Pin Function Descriptions, LFCSP
Pin No. Mnemonic Description
1
VOUT
Output Voltage. Connect Pin 1 and Pin 2 together.
2
VOUT
Output Voltage. Connect Pin 1 and Pin 2 together.
3
GND
Ground.
4
SEL1
Select Turn-On Time.
5
SEL0
Select Turn-On Time.
6
EN
Enable Input. Drive EN high to turn on the switch and drive EN low to turn off the switch.
7
VIN
Input Voltage. Connect Pin 7 and Pin 8 together.
8
VIN
Input Voltage. Connect Pin 7 and Pin 8 together.
EP
Exposed Pad. The exposed pad is connected to the substrate of the ADP198 and must be connected to ground.
Rev. D | Page 7 of 16