ADP3120A 데이터 시트보기 (PDF) - Analog Devices

부품명

상세내역

제조사

ADP3120A

Dual Bootstrapped, 12 V MOSFET Driver with Output Disable

Analog Devices 

ADP3120A

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

VCC

BST

DC

<200 ns

BST to SW

SW

DC

<200 ns

DRVH

DC

<200 ns

DRVL

DC

<200 ns

IN, OD

θJA, SOIC_N

2-Layer Board

4-Layer Board

θJA, LFCSP_VD1

4-Layer Board

Operating Ambient Temperature

Range

Junction Temperature Range

Storage Temperature Range

Lead Temperature

Soldering (10 sec)

Vapor Phase (60 sec)

Infrared (15 sec)

Rating

−0.3 V to +15 V

−0.3 V to VCC + 15 V

−0.3 V to +35 V

−0.3 V to +15 V

−5 V to +15 V

−10 V to +25 V

SW − 0.3 V to BST + 0.3 V

SW − 2 V to BST + 0.3 V

−0.3 V to VCC + 0.3 V

−2 V to VCC + 0.3 V

−0.3 V to +6.5 V

123°C/W

90°C/W

50°C/W

0°C to 85°C

0°C to 150°C

−65°C to +150°C

300°C

215°C

260°C

1 For LFCSP_VD, θJA is measured per JEDEC STD with exposed pad soldered to PCB.

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those listed in the operational sections

of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

Unless otherwise specified, all voltages are referenced to PGND.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.

Rev. 0 | Page 4 of 16

Share Link: