ADP3418 데이터 시트보기 (PDF) - Analog Devices

부품명

상세내역

제조사

ADP3418

Dual Bootstrapped 12 V MOSFET Driver with Output Disable

Analog Devices 

ADP3418

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Rating

VCC

–0.3 V to +15 V

BST

DC

<200 ns

BST to SW

SW

DC

< 200 ns

–0.3 V to VCC + 15 V

–0.3 V to 36 V

–0.3 V to +15 V

–5 V to +15 V

–10 V to +25 V

DRVH

SW – 0.3 V to BST + 0.3 V

DRVL (< 200 ns)

All Other Inputs and Outputs

Operating Ambient Temperature

Range

Operating Junction Temperature

Range

Storage Temperature Range

Junction-to-Air Thermal Resistance

(θJA)

2-Layer Board

4-Layer Board

Lead Temperature (Soldering, 10 s)

–2 V to VCC + 0.3 V

–0.3 V to VCC + 0.3 V

0°C to 85°C

0°C to 150°C

–65°C to +150°C

123°C/W

90°C/W

300°C

Infrared (15 s)

260°C

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability. Absolute maximum ratings apply individually

only, not in combination. Unless otherwise specified, all voltages

are referenced to PGND.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.

Rev. B | Page 4 of 16

Share Link: