DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

AS1916(2005) 데이터 시트보기 (PDF) - austriamicrosystems AG

부품명
상세내역
제조사
AS1916 Datasheet PDF : 13 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
AS1916 - AS1918
Data Sheet
7 Pinout
Pin Assignments
Figure 8. Pin Assignments (Top View)
RESETN/RESET 1
5 VCC
GND 2
AS1916 -
AS1918
MRN 3
4 WDI
austriamicrosystems
Pin Assignments
Pin Descriptions
Table 4. Pin Descriptions
Pin
Pin
Number Name
Description
Active-Low Reset Output (AS1916, AS1918). The RESETN signal toggles from high to low
RESETN
when VCC, or MRN is pulled low, or the watchdog triggers a reset. This output signal remains
low for the reset timeout period after all supervised voltages exceed their reset threshold, or
MRN goes low to high, or the watchdog triggers a reset.
1
Active-High Reset Output (AS1917). The RESET signal toggles from low to high when
RESET
VCC, or MRN is pulled low, or the watchdog triggers a reset. This output signal remains high
for the reset timeout period (see tRP on page 3) after all supervised voltages exceed their
reset threshold, or MRN goes low to high, or the watchdog triggers a reset.
2
GND Ground
Active-Low Manual Reset Input. Pulling this pin low asserts a reset. This pin is connected
to the internal 50kΩ pullup to VCC. This reset remains active as long as MRN is low and for
3
MRN the reset timeout period (see tRP on page 3) after MRN goes high.
Note: If the manual reset feature is not used, this pin should be unconnected or connected
to VCC.
Watchdog Input. If WDI remains high or low for longer than the watchdog timeout period
(see tWD on page 4), the internal watchdog timer period expires and a reset is triggered for
the reset timeout period (see tRP on page 3). The internal watchdog timer clears whenever a
4
WDI reset is a asserted or when WDI senses a rising or falling edge.
Note: To disable the watchdog feature, this pin must be unconnected or connected to a tri-
state buffer output.
5
VCC Supervised Voltage Input. This pin serves as the supervised supply voltage input.
www.austriamicrosystems.com
Revision 0.52
6 - 13

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]