AT90S8515 데이터 시트보기 (PDF) - Atmel Corporation
부품명
상세내역
제조사
AT90S8515 Datasheet PDF : 112 Pages
| |||
Timer Counter0 – TCNT0
16-bit Timer/Counter1
The Stop condition provides a Timer Enable/Disable function. The CK down divided
modes are scaled directly from the CK oscillator clock. If the external pin modes are
used for Timer/Counter0, transitions on PB0/(T0) will clock the counter even if the pin is
configured as an output. This feature can give the user software control of the counting.
Bit
$32 ($52)
Read/Write
Initial Value
7
6
MSB
R/W
R/W
0
0
5
R/W
0
4
R/W
0
3
R/W
0
2
R/W
0
1
R/W
0
0
LSB
R/W
0
TCNT0
The Timer/Counter0 is realized as an up-counter with read and write access. If the
Timer/Counter0 is written and a clock source is present, the Timer/Counter0 continues
counting in the clock cycle following the write operation.
Figure 30 shows the block diagram for Timer/Counter1.
Figure 30. Timer/Counter1 Block Diagram
T1
The 16-bit Timer/Counter1 can select clock source from CK, prescaled CK or an exter-
nal pin. In addition, it can be stopped as described in the specification for the
Timer/Counter1 Control Registers (TCCR1A and TCCR1B). The different status flags
(overflow, compare match and capture event) are found in the Timer/Counter Interrupt
Flag Register (TIFR). Control signals are found in the Timer/Counter1 Control Registers
34 AT90S8515
0841G–09/01
Share Link: 