ATF-33143 데이터 시트보기 (PDF) - HP => Agilent Technologies
부품명
상세내역
제조사
ATF-33143 Datasheet PDF : 14 Pages
| |||
ATF-33143 Typical Scattering Parameters, VDS = 4 V, IDS = 80 mA
Freq.
S11
S21
S12
(GHz) Mag. Ang. dB Mag. Ang. dB Mag. Ang.
0.5 0.86 -76.90 23.48 14.93 132.10 -28.64 0.037 55.40
0.9 0.77 -115.90 20.64 10.77 109.10 -25.85 0.051 43.90
1.0 0.76 -123.20 20.00 10.00 104.80 -25.51 0.053 42.10
1.5 0.72 -151.70 17.13 7.18 87.40 -24.01 0.063 36.00
2.0 0.72 -171.10 14.82 5.51 74.30 -22.97 0.071 32.10
2.5 0.72 170.10 12.96 4.45 62.60 -22.27 0.077 28.10
3.0 0.73 157.40 11.36 3.70 52.90 -21.51 0.084 24.60
4.0 0.74 135.90 8.92 2.79 35.40 -20.09 0.099 16.40
5.0 0.75 116.60 7.15 2.28 17.70 -18.86 0.114 5.70
6.0 0.77 97.60 5.63 1.91 -0.70 -17.99 0.126 -6.90
7.0 0.79 80.00 4.09 1.60 -18.60 -17.52 0.133 -20.60
8.0 0.82 64.50 2.61 1.35 -34.40 -17.33 0.136 -32.00
9.0 0.84 50.50 1.42 1.18 -48.60 -17.02 0.141 -42.10
10.0 0.86 36.40 0.52 1.06 -63.70 -16.48 0.150 -54.00
11.0 0.88 21.60 -0.57 0.94 -79.80 -16.42 0.151 -67.30
12.0 0.90
7.40 -1.81 0.81 -95.50 -16.59 0.148 -80.20
13.0
0.91
-4.90 -3.30 0.68 -110.00 -17.20 0.138 -92.00
14.0 0.91 -15.50 -4.54 0.59 -122.00 -17.59 0.132 -100.80
15.0 0.92 -27.40 -5.51 0.53 -134.50 -17.65 0.131 -110.80
16.0 0.93 -40.50 -6.34 0.48 -147.40 -17.65 0.131 -121.50
17.0 0.94 -52.30 -7.33 0.43 -161.20 -17.86 0.128 -134.00
18.0 0.93 -61.30 -8.61 0.37 -171.90 -18.49 0.119 -142.90
S22
Mag. Ang.
0.26 -126.60
0.34 -155.50
0.35 -160.50
0.39 -180.00
0.43 166.60
0.45 158.70
0.47 151.20
0.49 138.70
0.50 124.70
0.52 108.30
0.54 91.00
0.57 75.30
0.61 63.10
0.64 51.50
0.67 38.00
0.71 22.00
0.74
6.40
0.76
-5.60
0.79 -15.50
0.81 -25.40
0.82 -37.60
0.84 -49.50
MSG/MAG
(dB)
26.06
23.25
22.76
20.57
18.90
17.62
16.44
10.67
9.78
9.05
8.50
7.88
7.53
7.78
7.72
7.59
6.55
5.97
5.76
5.78
5.57
4.30
ATF-33143 Typical Noise Parameters
VDS = 4 V, IDS = 80 mA
Freq.
GHz
Fmin
dB
Γopt
Mag. Ang.
Rn/50
-
0.5
0.30
0.40
28.20 0.080
0.9
0.35
0.31
44.10 0.070
1.0
0.36
0.30
47.40 0.070
1.5
0.40
0.23
79.10 0.050
2.0
0.46
0.22
117.00 0.050
2.5
0.52
0.26
157.70 0.040
3.0
0.58
0.29
171.10 0.040
4.0
0.69
0.39 -157.20 0.044
5.0
0.80
0.46 -132.40 0.070
6.0
0.90
0.52 -109.40 0.130
7.0
1.02
0.57
-88.80 0.250
8.0
1.12
0.63
-70.50 0.420
9.0
1.21
0.66
-54.10 0.630
10.0
1.32
0.76
-40.40 0.830
Ga
dB
25.77
21.91
21.14
18.46
16.56
15.23
13.79
11.92
10.53
9.37
8.33
7.41
6.70
6.69
30
25
MSG
20
15
10
|S21|2
5
MAG
0
-5
0
5
10
15
20
FREQUENCY (GHz)
Figure 23. MSG/MAG and |S21|2 vs.
Frequency at 4V, 80 mA.
Notes:
1. The Fmin values are based on a set of 16 noise figure measurements made at 16 different impedances using an ATF NP5 test system.
From these measurements a true Fmin is calculated. Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the
end of the gate lead. The output reference plane is at the end of the drain lead. The parameters include the effect of four plated
through via holes connecting source landing pads on top of the test carrier to the microstrip ground plane on the bottom side of the
carrier. Two 0.020 inch diameter via holes are placed within 0.010 inch from each source lead contact point, one via on each side of
that point.
9
Share Link: 