2.3.12 RESET
2.3.13 XTAL1
2.3.14 XTAL2
2.3.15 AVCC
2.3.16 AREF
Reset input. A low level on this pin for longer than the minimum pulse length will generate a
reset, even if the clock is not running. The minimum pulse length is given in ”System and Reset
Characterizations” on page 308. Shorter pulses are not guaranteed to generate a reset.
Input to the inverting Oscillator amplifier and input to the internal clock operating circuit.
Output from the inverting Oscillator amplifier.
AVCC is the supply voltage pin for Port F and the A/D Converter. It should be externally con-
nected to VCC, even if the ADC is not used. If the ADC is used, it should be connected to VCC
through a low-pass filter.
This is the analog reference pin for the A/D Converter.
8 ATmega325P/3250P
8023F–AVR–07/09