ATMEGA329A 데이터 시트보기 (PDF) - Atmel Corporation
부품명
상세내역
제조사
ATMEGA329A Datasheet PDF : 29 Pages
| |||
The Atmel ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P provides the following fea-
tures: 16K/32K/64K bytes of In-System Programmable Flash with Read-While-Write capabilities, 512/1K/2K bytes
EEPROM, 1K/2K/4K byte SRAM, 54/69 general purpose I/O lines, 32 general purpose working registers, a JTAG
interface for Boundary-scan, On-chip Debugging support and programming, a complete On-chip LCD controller
with internal contrast control, three flexible Timer/Counters with compare modes, internal and external interrupts, a
serial programmable USART, Universal Serial Interface with Start Condition Detector, an 8-channel, 10-bit ADC, a
programmable Watchdog Timer with internal Oscillator, an SPI serial port, and five software selectable power sav-
ing modes. The Idle mode stops the CPU while allowing the SRAM, Timer/Counters, SPI port, and interrupt system
to continue functioning. The Power-down mode saves the register contents but freezes the Oscillator, disabling all
other chip functions until the next interrupt or hardware reset. In Power-save mode, the asynchronous timer and
the LCD controller continues to run, allowing the user to maintain a timer base and operate the LCD display while
the rest of the device is sleeping. The ADC Noise Reduction mode stops the CPU and all I/O modules except asyn-
chronous timer, LCD controller and ADC, to minimize switching noise during ADC conversions. In Standby mode,
the XTAL/resonator Oscillator is running while the rest of the device is sleeping. This allows very fast start-up com-
bined with low-power consumption.
Atmel offers the QTouch library for embedding capacitive touch buttons, sliders and wheels functionality into AVR
microcontrollers. The patented charge-transfer signal acquisition offers robust sensing and includes fully
debounced reporting of touch keys and includes Adjacent Key Suppression® (AKS®) technology for unambiguous
detection of key events. The easy-to-use QTouch Suite toolchain allows you to explore, develop and debug your
own touch applications.
The device is manufactured using the Atmel high density non-volatile memory technology. The On-chip In-System
re-Programmable (ISP) Flash allows the program memory to be reprogrammed In-System through an SPI serial
interface, by a conventional non-volatile memory programmer, or by an On-chip Boot program running on the AVR
core. The Boot program can use any interface to download the application program in the Application Flash mem-
ory. Software in the Boot Flash section will continue to run while the Application Flash section is updated, providing
true Read-While-Write operation.
By combining an 8-bit RISC CPU with In-System Self-Programmable Flash on a monolithic chip, the
ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P is a powerful microcontroller that pro-
vides a highly flexible and cost effective solution to many embedded control applications.
The ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P AVR is supported with a full
suite of program and system development tools including: C Compilers, Macro Assemblers, Program Debug-
ger/Simulators, In-Circuit Emulators, and Evaluation kits.
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [SUMMARY]
6
8284ES–AVR–02/2013
Share Link: 