AWL9232RS35Q1 데이터 시트보기 (PDF) - ANADIGICS
부품명
상세내역
제조사
AWL9232RS35Q1 Datasheet PDF : 18 Pages
| |||
AWL9232
802.11b/g/n WLAN PA/LNA/RF Switch
2400 – 2500 MHz
Preliminary Data Sheet - Rev 1.0
FEATURES
• 2.5% EVM @ POUT = +19 dBm with IEEE 802.11g
64 QAM OFDM at 54 Mbps
• -34 dBr 1st Sidelobe / -56 dBr 2nd Sidelobe ACPR
at +21 dBm with IEEE 802.11b at 1, 2, 5.5, 11
Mbps, Gaussian baseband filtering
• SP3T RF Switch to Enable Bluetooth Path
• Single +3.8 V Supply
• Transmit Path Linear Power of Gain 24 dB
• Receive Path In-Band Gain of 13 dB
• Receive Path Noise Figure of 1.9 dB
• 3 x 3 x 0.55 mm ULPCC Package
• Leadfree and RoHS Compliant
APPLICATIONS
• 802.11b/g WLAN in Consumer Electronics
Products (e.g., cell phones, MP3 players,
cameras, etc.)
• 2.4 GHz Cordless Phone Handsets/Basestations
AWL9232
S35 Package
16 Pin 3 mm x 3 mm x 0.55 mm
Surface Mount ULPCC
PRODUCT DESCRIPTION
The ANADIGICS AWL9232 is a high performance
InGaP HBT power amplifier, low-noise amplifier and
RF switch integrated on a single IC. It is particularly
applicable in consumer electronics products (e.g., cell
phones, MP3 players, cameras, etc.) that integrate
802.11b/g WLAN in the 2.4 - 2.5 GHz band. Matched
to 50 on all RF ports, the part requires only one
choke inductor and one power supply decoupling
cap off-chip.
The AWL9232 is manufactured using advanced InGaP
HBT technology that offers state-of-the-art reliability,
temperature stability and ruggedness. It is provided
in a 3 x 3 x 0.55 mm ULPCC package optimized for
a 50 system.
The antenna port is switched between WLAN transmit,
Bias Network
WLAN receive and Bluetooth paths with a low-loss
single-pole triple-throw RF switch. The transmit path
Rx RF OUT
Output
Match
PA exhibits unparalleled linearity for both IEEE 802.11g
WLAN Rx
Enable
and 802.11b WLAN systems under the toughest signal BLUETOOTH
Control
configurations within these standards. The WLAN
Enable
Logic
receive path from the antenna port to receiver output
WLAN Tx
Enable
port provides a low noise, high-gain path to the system
Tx RFIN
Input
Output
receiver chain. The AWL9232 is biased by a single
Match
Match
+3.8 V supply and consumes ultra-low current in the
OFF mode.
Bias Network
Antenna
04/2008
Figure 1: Block Diagram and Pinout
Share Link: 