AZ2692-118-52 데이터 시트보기 (PDF) - American Zettler, Inc.

부품명

상세내역

제조사

AZ2692-118-52

10 AMP MINIATURE POWER RELAY

American Zettler, Inc. 

AZ692/AZ693

10 AMP MINIATURE

POWER RELAY

FEATURES

• Isolation spacing greater than 8 mm

• Dielectric strength 4000 Vrms coil to contact

• Approvals/Standards include UL, VDE, IEC

• Single pole — Forms A, B, C available

• 10 Amp switching

• Life expectancy to 30 million operations

• Epoxy sealed version for automatic wave soldering

and cleaning

• UL, CUR file E44211; VDE 4120–4940–4002/A1

CONTACTS

Arrangement

Ratings

Material

Resistance

SPDT (1 Form C)

SPST (1 Form A and 1 Form B)

Resistive load:

Max. switched power: 300 W or 2500 VA

Max. switched current: 10 A; 64 A for 2 ms

Max. switched voltage: 150* VDC or 380 VAC

UL Rating

10 A at 24 VDC or 115 VAC

1/4 HP 120 VAC motor load

10 A at 250 VAC

B 300 pilot duty

* If switching voltage is greater than 30 VDC, special

precautions must be taken. Please contact the factory.

Silver cadmium oxide

< 30 milliohms initially

(at rated current, voltage drop method)

COIL

Power

At Pickup Voltage

(typical)

Max. Continuous

Dissipation

Temperature Rise

Temperature

Standard coil: 337 mW

Sensitive coil: 234 mW

1.9 W at 20°C (68°F) ambient

1.4 W at 40°C (104°F) ambient

Standard: 40°C (72°F) at nominal

coil voltage

Sensitive: 26°C (47°F) at nominal

coil voltage

Max. 110°C (230°F)

GENERAL DATA

Life Expectancy

Mechanical

Electrical

Minimum operations

30 million operations

1 x 105 at 10 A, 30 VDC or 115 VAC

2 x 105 at 8 A, 250 VAC

Operate Time (typical) 6 ms at nominal coil voltage

Release Time (typical) 2 ms at nominal coil voltage

(with no coil suppression)

Dielectric Strength

4000 Vrms coil to contact

(at sea level for 1 min.) 1000 Vrms between open contacts

Insulation

Resistance

10,000 megohms min. at 20°C, 500 VDC,

50% RH

Dropout

Greater than 10% of nominal coil voltage

Ambient Temperature

Operating

Storage

At nominal coil voltage

Standard: -55°C (-67°F) to 70°C (158°F)

Sensitive: -55°C (-67°F) to 80°C (176°F)

Both: -55°C (-67°F) to 110°C (230°F)

Vibration

0.062" DA at 10–55 Hz

Shock

20 g

Enclosure

P.B.T. polyester

Terminals

Tinned copper alloy, P.C.

Max. Solder Temp.

270°C (518°F)

Max. Solder Time

5 seconds

Max. Solvent Temp. 80°C (176°F)

Max. Immersion Time 30 seconds

Weight

17 grams

NOTES

1. All values at 20°C (68°F).

2. Relay may pull in with less than “Must Operate” value.

3. Unsealed relays should not be dip cleaned.

4. Specifications subject to change without notice.

7/24/02W

Share Link: