AP1117TL 데이터 시트보기 (PDF) - Analog Technology Inc

부품명

상세내역

제조사

AP1117TL

1A Low Dropout Positive Adjustable or Fixed-Mode Regulator

Analog Technology Inc 

1A Low Dropout Positive Adjustable or Fixed-Mode Regulator

AP1117

Pin Descriptions

NAME I/O

Adj (GND) I

Vout

O

Vin

I

PIN #

1

2

3

FUNCTION

A resistor divider from this pin to the Vout pin and ground sets the

output voltage. (Ground only for Fixed-Mode)

The output of the regulator. A minimum of 10uF capacitor (0.15Ω

≤ ESR ≤ 20Ω) must be connected from this pin to ground to insure

stability.

The input pin of regulator. Typically a large storage capacitor

(0.15Ω ≤ ESR ≤ 20Ω) is connected from this pin to ground to

insure that the input voltage does not sag below the minimum

dropout voltage during the load transient response. This pin must

always be 1.3V higher than Vout in order for the device to

regulate properly.

Absolute Maximum Ratings

Symbol

Parameter

Vin DC Supply Voltage

PD Power Dissipation

TST Storage Temperature

TOP Operating Junction Temperature Range

Rating

Unit

-0.3 to 12

V

Internally Limited

-65 to +150

oC

0 to +150

oC

Anachip Corp.

www.anachip.com.tw

Rev.1.0 Aug 17, 2004

3/11

Share Link: