CM2030
HDMI Transmitter Port Protection and Interface Device
Features
• HDMI 1.3 compliant
• Supports thin dielectric and 2-layer boards
• Minimizes TMDS skew with 0.05pF matching
• Long HDMI cable support with integrated I2C
accelerator
• Active termination and slew rate limiting for CEC
• Supports direct connection to CEC microcontroller
• Integrated I2C level shifting to CMOS level includ
ing low logic level voltages
• Integrated 8kV ESD protection and backdrive pro
tection on all external I/O lines
• Integrated overcurrent output protection per HDMI
1.3
• Multiport I2C support eliminates need for analog
mux on DDC lines
• Simplified layout with matched 0.5mm trace spac
ing
Product Description
The CM2030 HDMI Transmitter Port Protection and
Interface Device is specifically designed for next gener
ation HDMI Host interface protection.
An integrated package provides all ESD, slew rate lim
iting on CEC line, level shifting/isolation, overcurrent
output protection and backdrive protection for an HDMI
port in a single 38-Pin TSSOP package.
The CM2030 part is specifically designed to provide
the designer with the most reliable path to HDMI 1.3
CTS compliance.
The CM2030 also incorporates a silicon overcurrent
protection device for +5V supply voltage output to the
connector.
Applications
• PC and consumer electronics
• Set top box, DVD RW, PC, graphics cards
Electrical Schematic
TMDS_D2+
TMDS_GND
TMDS_D2-
TMDS_D1+
TMDS_GND
TMDS_D1
TMDS_D0+
TMDS_GND
TMDS_D0
TMDS_CK+
TMDS_GND
TMDS_CK
5V_SUPPLY
DDC_CLK_IN
LV_SUPPLY
CMOS/I2C
LEVEL SHIFT
5V_SUPPLY
DYNAMIC
PULLUP
LV_SUPPLY
DDC_DAT_IN
CMOS/I2C
DDC_CLK_OUT
LEVEL SHIFT
5V_SUPPLY
DYNAMIC
PULLUP
DDC_DAT_OUT
LV_SUPPLY
IS
HOTPLUG_DET_IN
3IS
CE_SUPPLY
HOTPLUG_DET_OUT CE_REMOTE_IN
5V_SUPPLY
55mA
OVERCURRENT
SWITCH
5V_OUT
CE_SUPPLY
ACTIVE SLEW
RATE
LIMITING
CE_REMOTE_OUT
© 2007 California Micro Devices Corp. All rights reserved.
490 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: 408.263.3214 ● Fax: 408.263.7846 ● www.cmd.com
1
Issue A – 11/16/07