CPC1967J 데이터 시트보기 (PDF) - Clare Inc => IXYS
부품명
상세내역
제조사
CPC1967J Datasheet PDF : 7 Pages
| |||
CPC1967
i4-PAC™ Power Relay
Characteristics
Parameter
Blocking Voltage
Load Current, TA=25°C:
With 5°C/W Heat Sink
No Heat Sink
On-Resistance
RθJC
Rating
400
3.35
1.35
0.85
0.35
Units
VP
Arms
Ω
°C/W
Features
• 3.35Arms Load Current with 5°C/W Heat Sink
• Low 0.85Ω On-Resistance
• 400VP Blocking Voltage
• 2500Vrms Input/Output Isolation
• Low Thermal Resistance (0.35 °C/W)
• Electrically Non-conductive Thermal Pad for Heat
Sink Applications
• Low Drive Power Requirements
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
Applications
• Industrial Controls / Motor Control
• Robotics
• Medical Equipment—Patient/Equipment Isolation
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Transportation Equipment
• Aerospace/Defense
Approvals
• UL 508 Recognized Component: File E69938
Pin Configuration
Description
Clare and IXYS have combined to bring OptoMOS®
technology, reliability and compact size to a new family
of high power Solid State Relays.
As part of this family, the CPC1967 single-pole
normally open (1-Form-A) Solid State Power Relay is
rated for up to 3.35Arms continuous load current with a
5°C/W heat sink.
The CPC1967 employs optically coupled MOSFET
technology to provide 2500Vrms of input to output
isolation. The output, constructed with efficient
MOSFET switches and photovoltaic die, uses Clare’s
patented OptoMOS architecture while the input, a
highly efficient GaAlAs infrared LED, provides the
optically coupled control. The combination of low
on-resistance and high load current handling
capability makes this relay suitable for a variety of high
performance switching applications.
The unique i4-PAC package pioneered by IXYS
enables Solid State Relays to achieve the highest load
current and power ratings. This package features a
unique IXYS process where the silicon chips are soft
soldered onto the Direct Copper Bond (DCB)
substrate instead of the traditional copper leadframe.
The DCB ceramic, the same substrate used in high
power modules, not only provides 2500Vrms isolation,
but also very low thermal resistance (0.35 °C/W).
Ordering Information
Part
CPC1967J
Description
i4-PAC Package (25 per tube)
Switching Characteristics
Form-A
IF
I
LOAD
90%
ton
10%
toff
RoHS
2002/95/EC
e3
DS-CPC1967 - R05
www.clare.com
1
Share Link: 