CPC5611ATR 데이터 시트보기 (PDF) - Clare Inc => IXYS
부품명
상세내역
제조사
CPC5611ATR Datasheet PDF : 18 Pages
| |||
CPC5610/CPC5611
LITELINK™ II Silicon Data Access Arrangement (DAA) IC
Features
• Full-duplex data and voice transmission
• Transformerless telephone line isolation interface
• Operates at all modem speeds, including V.90 (56K)
• 3.3 or 5 V power supply operation
• Half-wave ring detector (CPC5610) or full-wave ring
detector (CPC5611)
• Caller ID signal reception
• Small 32-pin SOIC plastic package
• Printed-circuit board space and cost savings
• Meets PC Card (PCMCIA) height requirements
• Easy interface with modem ICs and voice CODECs
• Worldwide dial-up telephone network compatibility
• Supplied application circuit complies with the
requirements of TIA/EIA/IS-968 (FCC part 68),
UL1950, UL60950, EN60950, IEC60950,
EN55022B, CISPR22B, EN55024, and TBR-21
• CPC5610 and CPC5611 comply with UL1577
• TTL compatible logic inputs and outputs
• Line-side circuit powered from telephone line
Applications
• Satellite and cable set-top boxes
• V.90 (and other standard) modems
• Fax machines
• Voicemail systems
• Computer telephony
• PBXs
• Telephony gateways
• Embedded modems for such applications as POS
terminals, automated banking, remote metering,
vending machines, security, and surveillance
Description
Clare CPC5610 and CPC5611 LITELINKs are silicon
data access arrangement (DAA) ICs used in data and
voice communication applications to make connec-
tions to the public switched telephone network
(PSTN). LITELINK uses on-chip optical components
and a few inexpensive external components to form a
complete voice or high-speed data telephone line
interface.
LITELINK eliminates the need for the large isolation
transformers or capacitors as used in other DAA con-
figurations. It incorporates the required high-voltage
isolation barrier in the surface-mount SOIC package.
The CPC5610 (half-wave ring detect) and CPC5611
(full-wave ring detect) build upon Clare’s existing
LITELINK line, with improved performance and 3.3 V
operation.
Ordering Information
Part Number
CPC5610A
CPC5610ATR
CPC5611A
CPC5611ATR
Description
32-pin surface mount DAA with half-wave ring
detect, tubed
32-pin surface mount DAA with half-wave ring
detect, tape and reel
32-pin surface mount DAA with full-wave ring
detect, tubed
32-pin surface mount DAA with full-wave ring
detect, tape and reel
Figure 1. CPC5610/CPC5611 Block Diagram
Isolation Barrier
Transmit
Isolation
Amplifier
Tx+
Transmit
Diff.
Tx-
Amplifier
Transconductance
Stage
2-4 Wire Hybrid
AC/DC Termination
Hookswitch
OH
RING
CID
Rx+
Rx-
Vref
AGC
Receive
Diff.
Amplifier
CID/
RING
MUX
Snoop Amplifier
Vref
AGC
Receive
Isolation
Amplifier
CSNOOP
CSNOOP
RSNOOP
RSNOOP
TIP+
VI Slope Control
AC Impedance Control
Current Limit Control
RING-
DS-CPC5610/5611-R9.0
www.clare.com
1
Share Link: 