CY7C026AV-25AXC 데이터 시트보기 (PDF) - Cypress Semiconductor
부품명
상세내역
제조사
CY7C026AV-25AXC Datasheet PDF : 19 Pages
| |||
CY7C024AV/024BV/025AV/026AV
CY7C0241AV/0251AV/036AV
Maximum Ratings
Exceeding maximum ratings[14] may shorten the useful life of the
device. User guidelines are not tested.
Storage Temperature ................................. –65°C to +150°C
Ambient Temperature with
Power Applied ............................................ –55°C to +125°C
Supply Voltage to Ground Potential............... –0.5V to +4.6V
DC Voltage Applied to
Outputs in High-Z State ......................... –0.5V to VCC + 0.5V
DC Input Voltage[15]............................... –0.5V to VCC + 0.5V
Output Current into Outputs (LOW) ............................. 20 mA
Static Discharge Voltage.......................................... > 2001V
Latch-up Current.................................................... > 200 mA
Operating Range
Range
Commercial
Industrial[16]
Ambient Temperature
0°C to +70°C
–40°C to +85°C
VCC
3.3V ± 300 mV
3.3V ± 300 mV
Electrical Characteristics
Over the Operating Range
Parameter
Description
VOH
Output HIGH Voltage (VCC=3.3V)
VOL
Output LOW Voltage
VIH
Input HIGH Voltage
VIL
Input LOW Voltage
IOZ
Output Leakage Current
IIX
Input Leakage Current
ICC
Operating Current (VCC = Max.,
IOUT = 0 mA) Outputs Disabled
Com’l.
Ind.[16]
ISB1
Standby Current (Both Ports TTL Level) Com’l.
CEL & CER ≥ VIH, f = fMAX
Ind.[16]
ISB2
Standby Current (One Port TTL Level)
Com’l.
CEL | CER ≥ VIH, f = fMAX
Ind.[16]
ISB3
Standby Current (Both Ports CMOS Level) Com’l.
CEL & CER ≥ VCC−0.2V, f = 0
Ind.[16]
ISB4
Standby Current (One Port CMOS Level) Com’l.
CEL | CER ≥ VIH, f = fMAX[18]
Ind.[16]
CY7C024AV/024BV/025AV/026AV
CY7C0241AV/0251AV/036AV
-20
-25
Unit
Min Typ Max Min Typ Max
2.4
2.4
V
0.4
0.4 V
2.0
–0.3[17]
2.0
0.8
V
0.8 V
–10
10 –10
10 μA
–10
10 –10
10 μA
120 175
115 165 mA
135 185 mA
35 45
30 40 mA
40 50 mA
75 110
65 95 mA
75 105 mA
10 500
10 500 μA
10 500 μA
70 95
60 80 mA
70 90 mA
Capacitance
Parameter[19]
CIN
COUT
Description
Input Capacitance
Output Capacitance
Test Conditions
TA = 25°C, f = 1 MHz,
VCC = 3.3V
Max
Unit
10
pF
10
pF
Notes
14. The voltage on any input or IO pin cannot exceed the power pin during power up.
15. Pulse width < 20 ns.
16. Industrial parts are available in CY7C026AV and CY7C036AV only.
17. VIL > –1.5V for pulse width less than 10ns.
18. fMAX = 1/tRC = All inputs cycling at f = 1/tRC (except output enable). f = 0 means no address or control lines change. This applies only to inputs at CMOS level
standby ISB3.
19. Tested initially and after any design or process changes that may affect these parameters.
Document #: 38-06052 Rev. *J
Page 8 of 19
[+] Feedback
Share Link: 