FLEX 10K
PCI Prototype Board
®
February 1998, ver. 1
Data Sheet
Features
General
Description
f
Functional
Description
s Peripheral component interconnect (PCI) standard form factor
expansion card
s Supports in-circuit reconfiguration with an EPC1 Configuration
EPROM, or the BitBlasterª, ByteBlasterª, or ByteBlasterMVª
download cable
s Includes an EPF10K30RC240-3 device
s 128 KBytes of on-board SRAM upgradable to 256 KBytes
s Local-side function can interface to a standard parallel port or a
standard VGA port
s I/O headers allowing users to interface with extra prototype devices
s External power connection for stand alone operation
s On-board headers
Ð Connect to either the BitBlaster or the ByteBlaster download
cable for device configuration
Ð Allow fast external local-side clock input
The PCI prototype board is designed to work with the pci_a MegaCoreª
function and is for demonstration purposes only. This data sheet provides
signal connections, jumper settings, supported components, and board
options for the Altera PCI prototype board, version 1.0.
For installation instructions, refer to ÒGetting Started with the pci_a
Prototype BoardÓ in the readme.htm file included with the pci_a
function.
Figure 1 shows the PCI prototype board block diagram.
Altera Corporation
1
A-DS-PCIDEMO-01