CL666-5001-1-21 데이터 시트보기 (PDF) - HIROSE ELECTRIC

부품명

상세내역

제조사

CL666-5001-1-21

Board-to-Wire Swing-Lock Connector for Low-Profile Power Source

HIROSE ELECTRIC 

Board-to-Wire Swing-Lock Connector for Low-Profile Power Source

DF61 Series

Swing-Lock Structure Illustration

Socket

Header lock

Protrusion

Recess

■Features

1.Reinforced Swing Lock Structure

Our unique swing-lock structure cradles the wire side plug

and resists the plug from becoming disengaged due to

handling strain or loads.

2.Header Lock Improves Plug Retention

During mating, the header lock engages with the plug

assembly. The lock is reinforced with metal which adds

strength to the lock and increases the retention between the

header and the plug.

3.Compact Size- High Voltage

The compact 2.2 mm pitch connector has a voltage rating of

350V due to the long creep distance.

4.Solder Wicking Prevention

Header is molded in one piece. This ensures a tight fit

between the contact and the header and prevents solder

wicking.

5.High Current of MAX 5 Amps (AWG22)

A highly conductive material is used for the contacts. The

material provides for a high current flow by reducing the

contact resistance.

Header

The protrusion on the bottom side of the socket fits into a

corresponding recess on the header. This aligns the socket into

the correct mating position.

Before Mating

After Mating

Header Lock

Metal

Reinforced with Metal

The metal fitting is partly molded

in the header’s housing lock.

The Header pushes down

the protrusion of the socket

and locks it in place.

Tensile strength of the cable:

10N or greater

Maximum Creep Distance

Isolated Male Contacts

2.2mm

■Applications

Digital cameras, digital video cameras, LED lights, laptop

computers, tablet computers, portable devices, power

supply equipment, etc.

An integrated wall

between the contacts

maximizes the creepage

distance for higher voltage

capabilities.

2013.4 ②

1

Share Link: