DS1204 데이터 시트보기 (PDF) - Maxim Integrated
부품명
상세내역
제조사
DS1204 Datasheet PDF : 6 Pages
| |||
Conclusion:
The following qualification successfully meets the quality and reliability standards required of all Dallas
Semiconductor products and processes:
DS1204, Rev F1
In addition, Dallas Semiconductor's continuous reliability monitor program ensures that all outgoing
product will continue to meet Maxim's quality and reliability standards. The current status of the
reliability monitor program can be viewed at http://www.maxim-ic.com/TechSupport /dsreliability.html.
Device Description:
A description of this device can be found in the product data sheet. You can find the product data
sheet at http://dbserv.maxim-ic.com/l_datasheet3.cfm.
Reliability Derating:
The Arrhenius model will be used to determine the acceleration factor for failure mechanisms that
are temperature accelerated.
AfT = exp((Ea/k)*(1/Tu - 1/Ts)) = tu/ts
AfT = Acceleration factor due to Temperature
tu = Time at use temperature (e.g. 55°C)
ts = Time at stress temperature (e.g. 125°C)
k = Boltzmann’s Constant (8.617 x 10-5 eV/°K)
Tu = Temperature at Use (°K)
Ts = Temperature at Stress (°K)
Ea = Activation Energy (e.g. 0.7 ev)
The activation energy of the failure mechanism is derived from either internal studies or industry
accepted standards, or activation energy of 0.7ev will be used whenever actual failure mechanisms
or their activation energies are unknown. All deratings will be done from the stress ambient
temperature to the use ambient temperature.
An exponential model will be used to determine the acceleration factor for failure mechanisms,
which are voltage accelerated.
AfV = exp(B*(Vs - Vu))
AfV = Acceleration factor due to Voltage
Vs = Stress Voltage (e.g. 7.0 volts)
Vu = Maximum Operating Voltage (e.g. 5.5 volts)
B = Constant related to failure mechanism type (e.g. 1.0, 2.4, 2.7, etc.)
The Constant, B, related to the failure mechanism is derived from either internal studies or industry
accepted standards, or a B of 1.0 will be used whenever actual failure mechanisms or their B are
unknown. All deratings will be done from the stress voltage to the maximum operating voltage.
Failure rate data from the operating life test is reported using a Chi-Squared statistical model at the
60% or 90% confidence level (Cf).
The failure rate, Fr, is related to the acceleration during life test by:
Fr = X/(ts * AfV * AfT * N * 2)
X = Chi-Sq statistical upper limit
N = Life test sample size
Share Link: 