DS1722S/TR 데이터 시트보기 (PDF) - Maxim Integrated

부품명

상세내역

제조사

DS1722S/TR

Digital Thermometer with SPI/3-Wire Interface

Maxim Integrated 

DS1722

3-WIRE SERIAL DATA BUS

The 3-wire communication mode operates similar to the SPI mode. However, in 3-wire mode, there is

one bi-directional I/O instead of separate data in and data out signals. The 3-wire consists of the I/O (SDI

and SDO pins tied together), CE, and SCLK pins. In 3-wire mode, each byte is shifted in LSB first

unlike SPI mode where each byte is shifted in MSB first. As is the case with the SPI mode, an address

byte is written to the device followed by a single data byte or multiple data bytes. Figure 7 illustrates a

read and write cycle. Figure 8 illustrates a multiple byte burst transfer. In 3-wire mode, data is input on

the rising edge of SCLK and output on the falling edge of SCLK.

3-WIRE SINGLE BYTE TRANSFER Figure 7

3-WIRE MULTIPLE BYTE BURST TRANSFER Figure 8

9 of 14

Share Link: