DS56-0006 데이터 시트보기 (PDF) - M/A-COM Technology Solutions, Inc.

부품명

상세내역

제조사

DS56-0006

Low Cost Six-Way SMT Power Divider 1700 – 2000 MHz

M/A-COM Technology Solutions, Inc. 

DS56-0006

Low Cost Six-Way SMT Power Divider

1700 – 2000 MHz

Rev. V3

Electrical Specifications: TA = 25°C, Z0 = 50Ω

Parameter

Insertion Loss above 7.8 dB

1700 – 2000 MHz

1850 – 1910 MHz

Isolation

1700 – 2000 MHz

1850 – 1910 MHz

VSWR Input

1700 – 2000 MHz

1850 – 1910 MHz

Output

1700 – 2000 MHz

1850 – 1910 MHz

Amplitude Balance

1700 – 2000 MHz

1850 – 1910 MHz

Phase Balance

1700 – 2000 MHz

1850 – 1910 MHz

Units

dB

dB

dB

dB

—

—

—

—

dB

dB

Deg.

Deg.

Min

—

—

18

21

—

—

—

—

—

—

—

—

Typ

1.3

1.0

25

26

1.7:1

1.3:1

1.3:1

1.1:1

0.8

1.0

10

8

Max

1.8

1.5

—

—

2.0:1

1.7:1

1.7:1

1.3:1

1.3

1.3

20

16

Absolute Maximum Ratings 2,3

Parameter

Input Power4

Operating Temperature

Storage Temperature

Absolute Maximum

1 W CW

-40°C to +85°C

-65°C to +150°C

2. Exceeding any one or combination of these limits may cause

permanent damage to this device.

3. M/A-COM does not recommend sustained operation near

these survivability limits.

4. With internal load dissipation of 0.125 W maximum.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

GMIC Circuits are sensitive to electrostatic

discharge (ESD) and can be damaged by static

electricity. Proper ESD control techniques should

be used when handling these devices.

2

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

• India Tel: +91.80.4155721

• China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

Commitment to produce in volume is not guaranteed.

changes to the product(s) or information contained herein without notice.

Share Link: