EL8108(2004) 데이터 시트보기 (PDF) - Intersil
부품명
상세내역
제조사
EL8108 Datasheet PDF : 12 Pages
| |||
EL8108
Absolute Maximum Ratings (TA = 25°C)
VS+ Voltage to Ground . . . . . . . . . . . . . . . . . . . . . . -0.3V to +13.2V
VIN+ Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND to VS+
Current into any Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8mA
Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . 75mA
Ambient Operating Temperature Range . . . . . . . . . .-40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . . . . . . .-60°C to +150°C
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +150°C
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
Electrical Specifications VS = 12V, RF = 750Ω, RL = 100Ω connected to mid supply, TA = 25°C, unless otherwise specified.
PARAMETER
DESCRIPTION
CONDITIONS
MIN TYP MAX
UNIT
AC PERFORMANCE
BW
-3dB Bandwidth
HD
Total Harmonic Distortion, Differential
SR
Slew Rate, Single-ended
DC PERFORMANCE
RF = 500Ω, AV = +2
RF = 500Ω, AV = +4
f = 200kHz, VO = 16VP-P, RL = 50Ω
f = 4MHz, VO = 2VP-P, RL = 100Ω
f = 8MHz, VO = 2VP-P, RL = 100Ω
f = 16MHz, VO = 2VP-P, RL = 100Ω
VOUT from -3V to +3V
200
MHz
150
MHz
-72
-83
dBc
-70
dBc
-60
dBc
-50
dBc
600 800 1100 V/µs
VOS
Offset Voltage
∆VOS
VOS Mismatch
ROL
Transimpedance
INPUT CHARACTERISTICS
VOUT from -4.5V to +4.5V
-25
+25 mV
-3
+3
mV
0.7
1.4
2.5
MΩ
IB+
Non-Inverting Input Bias Current
IB-
Inverting Input Bias Current
∆IB-
IB- Mismatch
eN
Input Noise Voltage
iN
-Input Noise Current
OUTPUT CHARACTERISTICS
-5
5
µA
-20
5
+20
µA
-18
0
+18
µA
6
nV√ Hz
13
pA/√ Hz
VOUT
IOUT
SUPPLY
Loaded Output Swing (single ended)
Output Current
VS = ±6V, RL = 100Ω to GND
VS = ±6V, RL = 25Ω to GND
RL = 0Ω
±4.8
±5
V
±4.7
V
450
mA
VS
Supply Voltage
IS (EL8108IS only) Supply Current, Maximum Setting
SUPPLY (EL8108IL ONLY)
Single supply
All outputs at mid supply
4.5
13
V
11
14.3
18
mA
IS+ (full power)
Positive Supply Current per Amplifier
IS+ (medium power) Positive Supply Current per Amplifier
IS+ (low power)
Positive Supply Current per Amplifier
IS+ (power down) Positive Supply Current per Amplifier
IINH, C0 or C1
C0, C1 Input Current, High
IINL, C0 or C1
C0, C1 Input Current, Low
All outputs at 0V, C0 = C1 = 0V
All outputs at 0V, C0 = 5V, C1 = 0V
All outputs at 0V, C0 = 0V, C1 = 5V
All outputs at 0V, C0 = C1 = 5V
C0, C1 = 5V
C0, C1 = 0V
11
14.3
18
mA
7
8.9
11
mA
3.7
4.5
5.5
mA
0.1
0.5
mA
90
125 160
µA
-5
+5
µA
2
Share Link: 