FAN7535 데이터 시트보기 (PDF) - Fairchild Semiconductor
부품명
상세내역
제조사
FAN7535 Datasheet PDF : 12 Pages
| |||
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In
addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only. TA=25°C, unless otherwise specified.
Symbol Parameter
PFC PART
Min. Typ. Max. Unit
VDDP Supply Voltage
IOH, IOL Peak Drive Output Current
lCLAMP Driver Output Clamping Diodes VO > VCC or VO < -0.3V
lDET Detector Clamping Diodes
VIN
Error Amplifier, MOT, CS Input Voltages
BALLAST PART
VB
High-side Floating Supply
VS
High-side floating supply return
VIN
RT, CPH Pins Input Voltage
VCL Clamping Voltage
ICL
Clamping Current Level
dVS/dt Allowable Offset Voltage Slew Rate
Common
Vz
V
-800
+500
±10
mA
±10
-0.3
6.0
V
-0.3
625.0
-0.3
600.0
V
-0.3
8.0
VCL
25
mA
50
V/ns
TOPR
TSTG
PD
θJA
Operating Temperature Range
Storage Temperature Range
Total Power Dissipation
Thermal Resistance (Junction-to-Air)
-25
+125
°C
-65
+150
1.5
W
83
°C/W
Caution:
Do not supply a low-impedance voltage source to the internal clamping Zener diode between the GND and the VDDB
and VDDP pins of this device. Use a common supply between the two ICs (PFC, Ballast) only under careful attention.
© 2007 Fairchild Semiconductor Corporation
FAN7535 Rev. 1.0.0
5
www.fairchildsemi.com
Share Link: 