F5CM Series (B2)
s MEASURMENT CIRCUIT
BALANCED IN/UNBALANCED OUT type
(Tx filter)
UNBLANCED IN/BALANCED OUT type
(Rx filter)
Input
50 Ω
4
4
2
2
Output
Input
6
50Ω
50 Ω
6
Output
50 Ω /
150 Ω
13 5
13 5
1 to 6: Pin Number
Note: Attached frequency response plots are obtained by simulation using above S21, S31, S32, S11,
S22, S33 of each characteristics. Electrical specifications are also decided based on these results.
s PART NUMBER DESIGNATION
[Designation example]
FAR–F5CM–
–B2 –
(1)
(2) (3)
(1) Frequency: Center frequency is specified in six alphanumeric.
Enter M (for MHz) at the decimal point.
Refer to below example.
[Example] 902.5 MHz ⇒ 902M50
(2) Part symbol: Specified characters from 60 to 79.
(3) Packing:
W: 1000 pcs/reel
(Reeled tape) V: 3000 pcs/reel
U: 5000 pcs/reel
s MARKING
LOGO
PART SYMBOL
DATE CODE
F 60
B1
LOT No.
INDEX
9