PTN3501 데이터 시트보기 (PDF) - Philips Electronics

부품명

상세내역

제조사

PTN3501

Maintenance and control device

Philips Electronics 

Philips Semiconductors

Maintenance and control device

Product specification

PTN3501

Interrupt (see Figs 11 and 12)

The PTN3501 provides an open drain output (INT) which can be fed

to a corresponding input of the microcontroller. This gives these

chips a type of master function which can initiate an action

elsewhere in the system.

An interrupt is generated by any rising or falling edge of the port

inputs in the input mode. After time tiv the signal INT is valid.

Resetting and reactivating the interrupt circuit is achieved when data

on the port is changed to the original setting or data is read from or

written to the port which has generated the interrupt.

Resetting occurs as follows:

• In the READ mode at the acknowledge bit after the rising edge of

the SCL signal

PTN3501

VDD

(1)

• In the WRITE mode at the acknowledge bit after the

HIGH–to–LOW transition of the SCL signal

• Returning of the port data to its original setting. A second port

state change will require an SCL rising clock edge to be captured

as an INT event.

• Interrupts which occur during the acknowledge clock pulse may

be lost (or very short) due to the resetting of the interrupt during

this pulse.

Each change of the I/Os after resetting will be detected and, after

the next rising clock edge, will be transmitted as INT. Reading from

or writing to another device does not affect the interrupt circuit.

PTN3501

(2)

PTN3501

(16)

INT

INT

INT

MICROCONTROLLER

INT

Figure 11. Application of multiple PTN3501s with interrupt

SW00790

SLAVE ADDRESS (I/O EXPANDER)

DATA FROM PORT

SDA

S 0 A5 A4 A3 A2 A1 A0 1 A

1

START CONDITION

R/W ACKNOWLEDGE P5

FROM SLAVE

SCL

12 345 678

1P

STOP CONDITION

DATA

INTO P5

INT

t iv

t ir

Figure 12. Interrupt generated by a change of input to I/O P5

SW00791

2001 Jan 17

6

Share Link: