FL07-0001-G
Low Cost SMT Low Pass Filter
DC – 1000 MHz
Rev. V2
Electrical Specifications: TA = 25°C, Z0 = 50Ω
Parameter
Insertion Loss: DC – 1000 MHz
VSWR: DC – 1000 MHz
Rejection: 1800 – 3500 MHz
2000 – 3000 MHz
Units
dB
—
dB
dB
Min
—
—
15
20
Typ
0.5
1.3:1
20
27
Max
1.0
1.6:1
—
—
Absolute Maximum Ratings 3,4
Parameter
Absolute Maximum
Input Power
2 W CW
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
3. Exceeding any one or combination of these limits may
cause permanent damage to this device.
4. M/A-COM does not recommend sustained operation near
these survivability limits.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
Typical Performance Curves
Insertion Loss vs. Frequency
VSWR vs. Frequency
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.