FOD2741B(2004) 데이터 시트보기 (PDF) - Fairchild Semiconductor
부품명
상세내역
제조사
FOD2741B Datasheet PDF : 15 Pages
| |||
OPTICALLY ISOLATED
ERROR AMPLIFIER
FOD2741A
FOD2741B
FOD2741C
ELECTRICAL CHARACTERISTICS (TA = 25°C Unless otherwise specified.)
INPUT CHARACTERISTICS
Parameter
Test Conditions Symbol Device Min. Typ. Max. Unit
LED Forward Voltage
(ILED = 10 mA, VCOMP = VFB) (fig.1)
VF
ALL
1.5 V
A 2.482 2.495 2.508 V
Reference Voltage
ILED = 10 mA, VCOMP = VFB VREF
B 2.470 2.495 2.520 V
C 2.450 2.500 2.550 V
Deviation of VREF over
temperature
TA = -25°C to +85°C VREF (DEV) ALL
4.5 17 mV
Ratio of VREF variation to the
output of the error amplifier
ILED = 10 mA
∆VCOMP = 10V to VREF
∆VCOMP = 36V to 10V
∆VREF/
∆VCOMP
ALL
-1.0 -2.7 mV/
-0.5 -2.0 V
Feedback Input Current
ILED = 10mA, R1 = 10kΩ (fig 3)
IREF
ALL
1.5
4 µA
Deviation of IREF over
temperature
TA = -25°C to +85°C IREF (DEV) ALL
0.4 1.2 µA
Minimum Drive Current
VCOMP = VFB (fig.1) ILED (MIN) ALL
0.45 1.0 mA
Off-state error amplifier current
VLED = 37V, VFB = 0 (fig 4.) I(OFF)
ALL
0.05 1.0 µA
Error amplifier output impedance
(see note 2)
VCOMP = VREF, ILED = 1mA to 20mA,
f ≥ 1.0 kHz
|ZOUT|
ALL
0.15 0.5 Ω
1. The deviation parameters VREF(DEV) and IREF(DEV) are defined as the differences between the maximum and minimum values
obtained over the rated temperature range. The average full-range temperature coefficient of the reference input voltage, ∆VREF,
is defined as:
∆VREF (ppm/°C) = -{---V----R----E---F---(--D----E----V---)--/--V----R----E---∆F----(T--T--A--A-----=------2---5----°--C-----)--}-----×----1----0---6-
where ∆TA is the rated operating free-air temperature range of the device.
2. The dynamic impedance is defined as |ZOUT| = ∆VCOMP/∆ILED. When the device is operating with two external resistors (see
Figure 2), the total dynamic impedance of the circuit is given by:
ZOUT, TOT = ∆--∆---V-I- ≈ ZOUT × 1 + RR-----12--
© 2003 Fairchild Semiconductor Corporation
Page 3 of 15
12/9/04
Share Link: 